
TECNA 2136D Bench Projection Welder, 100 kVA, 50 kA Short-Circuit Current
The TECNA 2136D is a bench projection welder rated at 100 kVA from the Bench Welders range, with a short-circuit current of 50 kA and two electrode forces, 1242 daN and 736 daN. Its maximum throat depth is 230 mm, and the transformer and electrodes are water cooled.
- Brand
- TECNA
- Country of manufacture
- Italy
- Model
- 2136D
- Series
- Bench Welders, 2101D–2144D range
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The manufacturer lists the TECNA 2136D as a projection welder within the Bench Welders range. Its transformer is rated at 100 kVA, with a short-circuit current of 50 kA and a thermal current of 7 kA. Compared with the spot welder of the same power, the 2136D has a higher short-circuit current, two electrode force values, 1242 daN and 736 daN, and a specified maximum throat depth of 230 mm. The secondary voltage has four values, 10 V, 7.1 V, 8 V and 9 V, which are identical on both machines.
Projection welding is carried out on embossments pre-formed on one part. The electrodes squeeze the pack, and the joints form at the embossments at the same moment. The operator feeds the parts by hand, and the foot pedal starts each cycle.
Force is applied by a pneumatic drive with a built-in compressed air filter. The components run without lubrication and give off no oil mist. The chrome-plated cylinder and stem suit heavy-duty cycles, and the anti-rotation device on the stem can be adjusted.
The 100 kVA transformer, electrode holders and electrodes are water cooled, and the transformer windings carry an epoxy coating. The machine must be connected to the water circuit before it runs. Current is set by phase shift, switched by a synchronous SCR contactor that is isolated from the water circuit and protected by a thermostat.
The series description does not name the control unit for this model. The machine has a two-step electric foot pedal, where the first step clamps and the second starts the weld, so the cycle runs only when the part sits correctly. Preparation exists for two-hand control with a timer, and the buttons are supplied on request.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Model | 2136D |
| Series | Bench Welders, 2101D–2144D range |
| Welding type | Projection welding |
| Power | 100 kVA |
| Short-circuit current | 50 kA |
| Thermal current | 7 kA |
| Secondary voltage | 10 V, 7.1 V, 8 V, 9 V |
| Electrode force | 1242 daN, 736 daN |
| Max. electrode throat depth | 230 mm |
| Cooling | water: transformer, electrode holders, electrodes |
| Transformer windings | epoxy coated |
| Current control | phase shift, synchronous SCR contactor with thermostat |
| Pneumatics | lubrication-free, built-in compressed air filter |
| Cylinder and stem | chrome-plated, adjustable anti-rotation device |
| Controls | two-step electric foot pedal, prepared for two-hand control |
Request a price and lead time
TECNA 2136D Bench Projection Welder, 100 kVA, 50 kA Short-Circuit Current. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What electrode forces does the TECNA 2136D offer?
Two values, 1242 daN and 736 daN, both produced by a pneumatic cylinder with a chrome-plated stem, with a maximum throat depth of 230 mm.
What welding current does the 2136D give?
A short-circuit current of 50 kA and a thermal current of 7 kA at a transformer rating of 100 kVA, with secondary voltages of 10 V, 7.1 V, 8 V and 9 V and phase-shift current adjustment.
How is the machine cooled?
Water cools the 100 kVA transformer, the electrode holders and the electrodes, and the SCR contactor is isolated from the water circuit and protected by a thermostat.
Similar equipment from other manufacturers






