
TECNA 2135D Bench Spot Welder, 100 kVA, 44 kA Short-Circuit Current
The TECNA 2135D is a bench spot welder rated at 100 kVA in the Bench Welders range, with a short-circuit current of 44 kA and an electrode force of 736 daN. Its transformer and electrodes are water cooled, and it is intended for shop welding of sheet parts.
- Brand
- TECNA
- Country of manufacture
- Italy
- Model (Item)
- 2135D
- Series
- Bench Welders, 2101D–2144D range
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Within the Bench Welders range, the 2135D is a spot welding machine built around a 100 kVA transformer. Its short-circuit current is 44 kA, lower than that of the projection machine of the same power, and it carries a single electrode force of 736 daN. No separate throat depth is given for it. Its secondary voltage steps, 10 V, 7.1 V, 8 V and 9 V, match those of the projection version, so the electrical side of the two machines is close, and the difference lies mainly in the pneumatics and the intended use. The thermal current is 7 kA.
The 2135D makes spot welds: sheet parts are clamped between two electrodes, and current passes through the pack at the contact point. The machine stands on the bench, the operator loads each part by hand and starts the cycle with a foot pedal.
The electrode force is produced by a pneumatic cylinder. A built-in compressed air filter cleans the supply, and the pneumatic components run without lubrication, so there is no oil mist in the workshop. The cylinder and stem are chrome plated for heavy use and a long service life, and an adjustable device restrains the stem from turning.
Cooling is water-based and covers the transformer, the electrode holders and the electrodes. The transformer windings of the 100 kVA unit are epoxy coated, and the machine needs a supply of cooling water at the place of installation. Current is adjusted by phase shift through a synchronous SCR thyristor contactor, which is insulated from the cooling water and protected by a thermostat.
The series description leaves the control unit for this model to be agreed separately. The operator works with a two-step electric foot pedal that clamps the part first and releases current only when the part sits in place. The machine is prepared for two-hand control with a timer, while the buttons are supplied on request, and the key selector is specified by the manufacturer only for certain models.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Model (Item) | 2135D |
| Series | Bench Welders, 2101D–2144D range |
| Welding type | Spot welding |
| Power | 100 kVA |
| Short-circuit current | 44 kA |
| Thermal current | 7 kA |
| Secondary voltage | 10 V, 7.1 V, 8 V, 9 V |
| Electrode force | 736 daN |
| Cooling | water: transformer, electrode holders, electrodes |
| Transformer windings | epoxy coated |
| Current control | phase shift, synchronous SCR contactor with thermostat |
| Pneumatics | lubrication-free, built-in compressed air filter |
| Cylinder and stem | chrome-plated, adjustable anti-rotation device |
| Controls | two-step electric foot pedal, prepared for two-hand control |
Request a price and lead time
TECNA 2135D Bench Spot Welder, 100 kVA, 44 kA Short-Circuit Current. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Is the 2135D a spot or a projection welder?
The manufacturer classes it as a spot welder for sheet parts on a bench machine. A two-step electric foot pedal clamps the part and then starts the weld.
What welding current does the 2135D give?
A short-circuit current of 44 kA and a thermal current of 7 kA from a 100 kVA transformer, with secondary voltages of 10 V, 7.1 V, 8 V and 9 V and current adjusted by phase shift.
Which parts of the 2135D are water cooled?
The transformer, the electrode holders and the electrodes. The SCR contactor is isolated from the cooling water and protected by a thermostat.
Similar equipment from other manufacturers






