International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 2133D Bench Spot Welder, 80 kVA, 38 kA Short-Circuit Current

The TECNA 2133D is a bench spot welder rated at 80 kVA in the Bench Welders range, with a short-circuit current of 38 kA and an electrode force of 736 daN. It sits in the middle of the range and suits steady runs of similar parts in a workshop.

Brand
TECNA
Country of manufacture
Italy
Model (Item)
2133D
Series
Bench Welders, 2101D–2144D range

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The 2133D sits in the middle of the Bench Welders line as a spot welder with an 80 kVA transformer. Its short-circuit current is 38 kA, its thermal current 6.8 kA and its electrode force 736 daN. The projection machine of the same power has a higher short-circuit current, two force values and a specified throat depth, whereas the 2133D is built around a single force. Its secondary voltages, 6.1 V, 6.7 V, 7.5 V and 8.3 V, match those of the projection pair.

Spot welding on this bench machine is done with the parts fed by hand: a stack of sheet is laid between the electrodes, the pedal first squeezes it, and then the current is switched on. The layout suits a workshop section that processes a steady flow of identical parts.

Pressure for clamping comes from a pneumatic drive, and the air it uses is cleaned by a filter built into the machine. No lubrication is needed anywhere in the circuit, so no oil mist is released. The cylinder and stem have a chrome coating for heavy work, and the rotation of the stem is limited by an adjustable device.

The 80 kVA transformer, electrode holders and electrodes are water cooled, and the transformer windings are epoxy coated. The machine is connected to a cooling water circuit before it runs. The current is set by phase shift, switched by a synchronous SCR contactor that is isolated from the cooling water and fitted with a protective thermostat.

The control unit for this model is not named in the series description. The operator works with a two-step electric foot pedal, where the first step clamps the part and the second starts the weld, but only once the part is in position. Preparation exists for two-hand control with a timer, while the buttons are supplied on request.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model (Item)2133D
SeriesBench Welders, 2101D–2144D range
Welding typeSpot welding
Power80 kVA
Short-circuit current38 kA
Thermal current6.8 kA
Secondary voltage6.1 V, 6.7 V, 7.5 V, 8.3 V
Electrode force736 daN
Coolingwater: transformer, electrode holders, electrodes
Transformer windingsepoxy coated
Current controlphase shift, synchronous SCR contactor with thermostat
Pneumaticslubrication-free, built-in compressed air filter
Cylinder and stemchrome-plated, adjustable anti-rotation device
Controlstwo-step electric foot pedal, prepared for two-hand control

Request a price and lead time

TECNA 2133D Bench Spot Welder, 80 kVA, 38 kA Short-Circuit Current. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Which parts suit the TECNA 2133D?

Sheet parts spot welded by hand at the bench, with a single electrode force of 736 daN and a power rating of 80 kVA.

What current does the 2133D give?

A short-circuit current of 38 kA and a thermal current of 6.8 kA, at secondary voltages of 6.1 V, 6.7 V, 7.5 V or 8.3 V with phase-shift control.

What cooling does the 2133D need?

Water through the 80 kVA transformer, the electrode holders and the electrodes, with the SCR contactor isolated from that circuit and protected by a thermostat.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides