
TECNA 2131D bench spot welder, 63 kVA, 34 kA
The TECNA 2131D is an Italian-built bench spot welder from the Bench Welders series, with a 63 kVA transformer, a 34 kA short circuit current and an electrode force of 736 daN. Its transformer, electrode holders and electrodes are water-cooled, which suits workshop joining of sheet parts.
- Brand
- TECNA
- Country of manufacture
- Italy
- Model (Item)
- 2131D
- Series
- Bench Welders, range 2101D–2144D
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The TECNA 2131D is a bench spot welder from the Bench Welders series, rated at 63 kVA with a short circuit current of 34 kA and a thermal current of 6.2 kA. It has a single electrode force of 736 daN and four secondary voltage steps: 5 V, 5.6 V, 6.3 V and 7.1 V. In those voltage steps it matches the 63 kVA projection model in the same range, but it runs at a lower short circuit current and offers only one force setting.
The manufacturer classes the 2131D as spot welding. The operator places a stack of sheet parts between the electrodes on the machine table, squeezes it, and starts the current pulse with the foot pedal. Because joints are made at separate points, the machine suits work where the connection is formed point by point.
The pneumatics are assembled from parts that need no lubrication, so no oil enters the air and the work area stays clean. A built-in filter cleans the air supply. The chrome plated cylinder and stem are designed for intensive use and long service, and an adjustable device stops the stem from turning.
Three units are cooled by water: the 63 kVA transformer, the electrode holders and the electrodes themselves. The transformer windings are covered with epoxy resin, and the machine is connected to the water circuit of the workshop. Current is set by phase shift, switched by a synchronous SCR contactor that is isolated from the water circuit and fitted with a protective thermostat. The manufacturer does not name a control unit for this model in the series description; the TE550 and TE101 are mentioned only for the 2101D, 2103D and 2102N. The operator works with a two-stage electric pedal, which clamps the part first and only then delivers current, provided the part is in place. The machine is prepared for two-hand control with a timer, but those buttons are supplied on order, and the key selector is specified by the manufacturer for the 2101D and 2103D only.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Model (Item) | 2131D |
| Series | Bench Welders, range 2101D–2144D |
| Welding type | spot welding |
| Power | 63 kVA |
| Short circuit current | 34 kA |
| Thermal current | 6.2 kA |
| Secondary voltage | 5 V, 5.6 V, 6.3 V, 7.1 V |
| Electrode force | 736 daN |
| Cooling | water: transformer, electrode holders, electrodes |
| Transformer windings | epoxy resin coated |
| Current control | phase shift, synchronous SCR contactor with thermostat |
| Pneumatics | lubrication free, built-in compressed air filter |
| Cylinder and stem | chrome plated, adjustable anti-rotation device |
| Controls | two-stage electric foot pedal, prepared for two-hand control |
Request a price and lead time
TECNA 2131D bench spot welder, 63 kVA, 34 kA. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What electrode force does the TECNA 2131D deliver?
The electrode force is 736 daN, produced by a pneumatic cylinder with a chrome plated stem. The manufacturer does not give a separate electrode throat depth for this model.
What welding current does the 2131D provide?
The short circuit current is 34 kA and the thermal current 6.2 kA, from a 63 kVA transformer. Secondary voltage steps are 5 V, 5.6 V, 6.3 V and 7.1 V, with current adjusted by phase shift.
What does the machine need connected to it?
Compressed air for the pneumatic drive, passed through the built-in filter, and cooling water for the transformer, electrode holders and electrodes. The mains voltage is confirmed at the enquiry stage.
Similar equipment from other manufacturers






