
TECNA 2125D bench spot welder, 63 kVA, 35 kA
The TECNA 2125D is an Italian-built bench spot welder from the Bench Welders series, with a 63 kVA transformer, a 35 kA short circuit current and an electrode force of 470 daN. Its transformer, electrode holders and electrodes are water-cooled, so it fits workshop joining of sheet parts.
- Brand
- TECNA
- Country of manufacture
- Italy
- Model (Item)
- 2125D
- Series
- Bench Welders, range 2101D–2144D
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The TECNA 2125D is a bench spot welder from the Bench Welders series, with a 63 kVA transformer, a short circuit current of 35 kA and a thermal current of 6.2 kA. It has a single secondary voltage of 7.1 V and an electrode force of 470 daN. Compared with the projection model of the same configuration, its short circuit current is slightly lower, while thermal current, voltage and force are the same. The transformer rating matches the larger spot model in the range, so the choice between them depends on the force and the number of voltage steps needed.
The 2125D makes spot welds: sheet parts are clamped between two electrodes and current passes through the pack at the point of contact. It is a table-top unit, so the operator loads the part by hand and starts the cycle with the foot pedal.
Electrode force is produced by a pneumatic cylinder. A built-in compressed air filter cleans the supply, and the components run without lubrication, so no oil mist is released. The cylinder and stem are chrome plated for heavy duty use and long life, and an adjustable device limits rotation of the stem.
Water cools the transformer, the electrode holders and the electrodes, and the transformer windings are coated with epoxy resin. The machine therefore needs a cooling water supply on site. Current is set by phase shift and switched by a synchronous SCR contactor, which is insulated from the cooling water circuit and protected by a thermostat. The series description does not name a control unit for the 2125D: the TE550 with current stabilisation is assigned to the 2101D and 2103D, and the TE101 to the 2102N, so the type is confirmed at the enquiry stage. The cycle runs from a two-stage electric pedal, where the first stage clamps and the second starts welding, and current follows only when the part is placed correctly. The machine is pre-set for two-hand control with a timer, with the buttons supplied on request.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Model (Item) | 2125D |
| Series | Bench Welders, range 2101D–2144D |
| Welding type | spot welding |
| Power | 63 kVA |
| Short circuit current | 35 kA |
| Thermal current | 6.2 kA |
| Secondary voltage | 7.1 V |
| Electrode force | 470 daN |
| Cooling | water: transformer, electrode holders, electrodes |
| Transformer windings | epoxy resin coated |
| Current control | phase shift, synchronous SCR contactor with thermostat |
| Pneumatics | lubrication free, built-in compressed air filter |
| Cylinder and stem | chrome plated, adjustable anti-rotation device |
| Controls | two-stage electric foot pedal, prepared for two-hand control |
Request a price and lead time
TECNA 2125D bench spot welder, 63 kVA, 35 kA. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What electrode force does the TECNA 2125D deliver?
The electrode force is 470 daN, produced by a pneumatic cylinder with a chrome plated stem. The manufacturer does not give a separate electrode throat depth for this model.
What welding current does the 2125D provide?
The short circuit current is 35 kA and the thermal current 6.2 kA, from a 63 kVA transformer. The secondary voltage is 7.1 V, and current is adjusted by phase shift.
What type of welding is the 2125D intended for?
The manufacturer classes it as spot welding of sheet parts on a bench machine. A two-stage foot pedal clamps the part and then starts the weld.
Similar equipment from other manufacturers






