
TECNA 2123D bench spot welder, 50 kVA, 27 kA
The TECNA 2123D is an Italian-built bench spot welder from the Bench Welders series, with a 50 kVA transformer, a 27 kA short circuit current and an electrode force of 470 daN. Water-cooled transformer, electrode holders and electrodes allow it to handle workshop joining of sheet parts.
- Brand
- TECNA
- Country of manufacture
- Italy
- Model (Item)
- 2123D
- Series
- Bench Welders, range 2101D–2144D
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The TECNA 2123D sits at the smaller end of the Bench Welders range as a spot welder with a 50 kVA transformer. Its short circuit current is 27 kA and its thermal current is 7 kA, which is higher than in some of the more powerful machines in the range. It has one secondary voltage, 5 V, and an electrode force of 470 daN. A projection machine of the same power in the series has a slightly higher short circuit current at the same voltage and force.
On the 2123D the operator places a stack of sheet parts between the electrodes on the table, squeezes it and starts a pulse of current with the foot pedal. The manufacturer classes the welding as spot, so the machine is intended for joints made at separate points.
The pneumatic system is built from parts that need no lubrication, so no oil enters the air and the work area stays clean. A built-in filter cleans the compressed air. The chrome plated cylinder and stem are designed for intensive use and long service, and an adjustable device stops the stem from turning.
Three units are water cooled: the 50 kVA transformer, the electrode holders and the electrodes. The transformer windings are coated with epoxy resin, and the machine is connected to the water circuit of the workshop. Current is adjusted by phase shift and switched by a synchronous SCR contactor, isolated from the cooling water and fitted with a thermostat. The series description does not name a control unit for this model; the TE550 and TE101 are mentioned only for the 2101D, 2103D and 2102N. The two-stage electric foot pedal clamps the part first and delivers current only when the part is correctly placed. The machine is prepared for two-hand control with a timer, but the buttons are supplied on order, and the key selector is provided only on the 2101D and 2103D.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Model (Item) | 2123D |
| Series | Bench Welders, range 2101D–2144D |
| Welding type | spot welding |
| Power | 50 kVA |
| Short circuit current | 27 kA |
| Thermal current | 7 kA |
| Secondary voltage | 5 V |
| Electrode force | 470 daN |
| Cooling | water: transformer, electrode holders, electrodes |
| Transformer windings | epoxy resin coated |
| Current control | phase shift, synchronous SCR contactor with thermostat |
| Pneumatics | lubrication free, built-in compressed air filter |
| Cylinder and stem | chrome plated, adjustable anti-rotation device |
| Controls | two-stage electric foot pedal, prepared for two-hand control |
Request a price and lead time
TECNA 2123D bench spot welder, 50 kVA, 27 kA. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What electrode force does the TECNA 2123D deliver?
The electrode force is 470 daN, produced by a pneumatic cylinder with a chrome plated stem. The manufacturer does not give a separate electrode throat depth for this model.
What welding current does the 2123D provide?
The short circuit current is 27 kA and the thermal current 7 kA, from a 50 kVA transformer. The secondary voltage is 5 V, and current is adjusted by phase shift.
What needs to be connected to the machine?
Compressed air for the pneumatic drive, passed through the built-in filter, and cooling water for the transformer, electrode holders and electrodes. The mains voltage is confirmed at the enquiry stage.
Similar equipment from other manufacturers






