
TECNA 2113SH medium frequency projection bench welding machine, Sensum, 35 kVA, 187 daN
TECNA 2113SH is a bench projection welding press with a Sensum medium frequency inverter, built for projection resistance welding. It runs from a touch screen programming panel, and its transformer and electrodes are water cooled.
- Brand
- TECNA
- Country of manufacture
- Italy
- Type
- bench medium frequency projection welding machine
- Control system
- Sensum
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The 2113SH is a compact bench machine built specifically for projection welding, rated at 35 kVA. It produces a 19 kA short-circuit current, a 3.7 kA thermal current and a 6.1 V secondary voltage, and its electrode force reaches 187 daN. Because the machine is designed purely for projection work, the two-hand control with timer and removable key selector comes as standard. TECNA builds it in Italy.
The pneumatic side uses a chrome-plated rod cylinder that suits heavy duty and a long service life, with an adjustable anti-rotation device. The double-stroke cylinder is adjustable and switched by key. Pneumatic parts run without lubrication, so no oil mist reaches the workshop. A filter unit with a compressed air pressure regulator is built into the body, together with a disconnect device for the air supply. Throttle valves set the electrode speed, a damper cushions the end of the stroke, and silencers on the exhaust keep the noise down.
Water cools the transformer, the platens, the electrode holders and the electrodes, and the transformer windings are encapsulated in epoxy resin. A flow meter and thermometer, with the flow shown on the control panel, stop the machine running without cooling. The cycle runs from a two-stage electric pedal: the first stage clamps the part, and welding starts only once the workpiece is correctly placed. A second two-stage pedal can be attached to call another welding programme directly, and an emergency stop button halts the machine at once.
Control is handled by a touch screen with a programmable Sensum interface. The Sensum inverter, along with its protection and safety devices, is housed in a separate cabinet sized to the machine's power and placed on the bench beside the welder. The inverter drives the welding transformer at medium frequency, and the transformer delivers low voltage, high current direct welding current. That current can be measured with a Rogowski sensor and regulated in closed loop. Extra actuators and process sensors connect through an optional expansion board.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Type | bench medium frequency projection welding machine |
| Control system | Sensum |
| Power | 35 kVA |
| Short-circuit current | 19 kA |
| Thermal current | 3.7 kA |
| Secondary voltage | 6.1 V |
| Electrode force | 187 daN |
| Cooling | water: transformer, platens, electrode holders, electrodes |
| Safety control | two-hand with timer and removable key selector, emergency stop button |
Request a price and lead time
TECNA 2113SH medium frequency projection bench welding machine, Sensum, 35 kVA, 187 daN. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What is the TECNA 2113SH built for?
It is a bench machine for projection resistance welding. The two-hand control with timer and removable key selector is standard on projection models.
What currents does the 2113SH deliver?
It has a 19 kA short-circuit current and a 3.7 kA thermal current, with a 35 kVA power rating and a 6.1 V secondary voltage.
Does the 2113SH need water cooling?
Yes. Water cools the transformer, the platens, the electrode holders and the electrodes, and a flow meter and thermometer on the panel stop the machine running without cooling.
Similar equipment from other manufacturers






