International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 2112SH medium frequency spot bench welding machine, Sensum, 35 kVA, 187 daN

TECNA 2112SH is a bench spot welder driven by a Sensum medium frequency inverter. Rated at 35 kVA, with a 19 kA short-circuit current and 187 daN electrode force, it has water cooling and SENSUM touch control.

Brand
TECNA
Country of manufacture
Italy
Control system
Sensum
Type
medium frequency bench spot welding machine

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The 2112SH is the smaller bench spot welder in the Sensum series, rated at 35 kVA with a 19 kA short-circuit current, a 3.7 kA thermal current and a 6.1 V secondary voltage. Its electrode force reaches 187 daN, which suits lighter spot joints rather than the heavier work of the larger models. Apart from the missing compressed air disconnect device, the pneumatic, cooling and control arrangement matches the higher-rated machines in the range.

A two-stage electric pedal drives the cycle: the clamp is applied first, and welding follows only once the part is correctly positioned. A second two-stage pedal can be connected to call a different programme directly. Water cools the transformer with epoxy resin-encapsulated windings, the platens, the electrode holders and the electrodes. The machine will not start without cooling, because a flow meter and thermometer monitor it, and the flow is shown on the panel. An emergency stop button is fitted for immediate shutdown. Two-hand control with a timer and a removable key switch is prepared for the machine but is supplied on request.

The mechanical side is built for long duty under heavy loads. The cylinder rod is chrome plated, and the anti-rotation device can be adjusted. Pneumatic components run without lubrication, so there is no oil mist. The double-stroke cylinder is set and switched with a key. Compressed air enters through a built-in filter with a pressure regulator. Electrode speed is set by throttle valves, the end of stroke is cushioned by a damper, and exhaust air passes through silencers, which keeps the machine quiet in operation.

The Sensum inverter forms the basis of this direct current resistance welding installation. It controls the welding current, the control devices and actuators, and the machine and process sensors. The inverter feeds the welding transformer with medium frequency current, and the transformer converts it into low voltage, high current direct welding current. The current can be measured with a Rogowski sensor and regulated in closed loop. Actuators and additional monitoring sensors connect through an optional IO expansion board. The touch screen offers a programmable SENSUM interface, while the inverter with its protection and safety equipment sits in a separate cabinet beside the machine on the bench, sized to the machine's power.

Technical specifications

BrandTECNA
Country of manufactureItaly
Control systemSensum
Typemedium frequency bench spot welding machine
Power35 kVA
Short-circuit current19 kA
Thermal current3.7 kA
Secondary voltage6.1 V
Electrode force187 daN
Coolingwater: transformer, platens, electrode holders, electrodes
Controltouch screen, SENSUM interface, two-stage pedal
Two-hand controlon request
Compressed air disconnect devicenone

Request a price and lead time

TECNA 2112SH medium frequency spot bench welding machine, Sensum, 35 kVA, 187 daN. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What current and electrode force does the TECNA 2112SH have?

It has a 19 kA short-circuit current and a 3.7 kA thermal current at a 6.1 V secondary voltage, with an electrode force of 187 daN and a power rating of 35 kVA.

Does the 2112SH have two-hand control?

Two-hand control with a timer and removable key switch is available to order on spot models, and the machine is prepared for it.

Does the 2112SH include a compressed air disconnect device?

No, the 2112SH does not have one. It does have a built-in filter with a pressure regulator, as do the other models in the series.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides