International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 2101D bench spot welder, 16 kVA

The TECNA 2101D is an Italian-built bench spot welder from the Bench Welders series, with a 16 kVA transformer cooled with water along with its electrode holders and electrodes. It carries the TE550 constant current control unit, a lubrication free pneumatic drive and a two-stage pedal.

Brand
TECNA
Country of manufacture
Italy
Series
2102N / 2101D:2144D
Type
bench spot and projection welder

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The TECNA 2101D belongs to the Italian bench series TECNA 2102N / 2101D:2144D and works in spot welding mode from a 16 kVA transformer. The series covers machines from 16 to 150 kVA, and the 2101D sits at the lower edge of that range. Compared with its neighbour, the 2102N, it stands apart through its control unit: the 2101D uses the TE550 with constant current regulation, while the 2102N gets the simpler TE101 unit. The second difference concerns safety, since like the 2103D the 2101D is prepared for two-hand control with a timer and has a removable key selector.

The short circuit current is 16.5 kA and the thermal current is 3.3 kA, with two secondary voltage steps, 1.7 V and 3.4 V. The electrode force reaches 187 daN, so the machine is intended for joining parts that are conveniently fed by hand at the bench.

Water cools the transformer, the electrode holders and the electrodes, and the transformer windings are covered with epoxy resin. Current is set by phase shift and switched by a synchronous SCR contactor, which is insulated from the cooling water circuit and protected by a thermostat against overheating.

The pneumatic section uses components that need no lubrication, so no oil mist appears in the workshop air, and a compressed air filter unit is built in. The chrome plated cylinder and stem are finished for heavy duty use and long life, and the anti-rotation device on the stem is adjustable. The operator works with a two-stage electric pedal: the first stage clamps the part, the second starts the weld, and the cycle runs only when the part is placed correctly. Push buttons for two-hand control are supplied on request, and the removable key selector can be taken out so that others cannot change the settings.

Technical specifications

BrandTECNA
Country of manufactureItaly
Series2102N / 2101D:2144D
Typebench spot and projection welder
Welding typespot welding
Power16 kVA
Short circuit current16.5 kA
Thermal current3.3 kA
Secondary voltage1.7 V, 3.4 V
Electrode force187 daN
Control unitTE550, constant current
Current controlphase shift
Coolingwater: transformer, electrode holders, electrodes
Cycle controltwo-stage electric pedal
Safetyprepared for two-hand control with timer, removable key selector

Part numbers

Show all part numbers (1)

2101D

Request a price and lead time

TECNA 2101D bench spot welder, 16 kVA. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

How does the 2101D differ from the 2102N?

The 2101D has a TE550 control unit with constant current, and it is prepared for two-hand control with a removable key selector, while the 2102N has the TE101 unit.

What electrode force and current does the 2101D give?

The electrode force is 187 daN, the short circuit current 16.5 kA and the thermal current 3.3 kA at a rating of 16 kVA.

Is water cooling required?

Yes, the transformer, electrode holders and electrodes are water-cooled, and the SCR contactor is isolated from the water circuit and has a protective thermostat.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides