
TECNA 1861W Inverter Power Source for Resistance Welding, Imax 25000 A
TECNA 1861W is an inverter power source from the Sensum line, with an MFDC transformer rated at 56 kVA and a maximum current of 25000 A. It supplies robotic guns and spot welding installations in automated cells.
- Brand
- TECNA
- Country of manufacture
- Italy
- Series
- Sensum
- Transformer
- MFDC 56 kVA
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Within the Sensum inverter line, the 1861W is set apart by its 56 kVA MFDC transformer and a maximum current of 25000 A. Its primary current reaches 500 A, so the supply line, circuit breakers and cable cross-section are chosen to match that figure. When comparing models in the series, the transformer rating, Imax and primary current are the three numbers to look at.
The unit connects to a three-phase 400 V supply at 50 Hz. The MFDC scheme means the mains voltage is first rectified, the inverter then forms an alternating voltage at raised frequency, and the transformer with its rectifier supplies direct current to the electrodes. For spot welding this gives a current that rises evenly within each pulse, with parameters adjusted in short steps and not tied to the half-cycles of the mains.
Cooling is by water, in the heavy duty version, designed for demanding running. Water supply and inlet temperature are set in the cell project together with the gun cooling circuit. The unit weighs 70 kg, and the manufacturer gives dimensions of 600 x 447 x 760 cm, so the installation spot should be checked against the drawing before fitting.
TECNA places the 1861W under the industrial resistance welding systems and robotic guns and automation groups. A typical layout has the power source in a cabinet beside the robot, the guns on the robot flange and control handled by the Sensum system. Such a source is used on body and sheet assembly lines, where the robot runs a series of spots without operator involvement.
The manufacturer is the Italian company TECNA. The exact kit for a given cell, the gun type and the controller are selected from the assembly drawing, the sheet thickness and the required welding rate.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Series | Sensum |
| Transformer | MFDC 56 kVA |
| Imax | 25000 A |
| Mains voltage (3 phases) | 400 V |
| Mains frequency, Hz | 50 |
| Maximum primary current, A | 500 |
| Cooling | water (heavy duty) |
| Dimensions H/W/D, cm | 600 x 447 x 760 |
| Weight, kg | 70 |
Request a price and lead time
TECNA 1861W Inverter Power Source for Resistance Welding, Imax 25000 A. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What mains supply does the TECNA 1861W need?
A three-phase 400 V supply at 50 Hz, with a maximum primary current of 500 A, which sets the cable and protection sizing.
What is the maximum welding current of the 1861W?
Imax is 25000 A with the MFDC 56 kVA transformer.
Does the unit need water cooling?
Yes. The unit has water cooling in the heavy duty version, and the cooling loop is planned into the cell project.
Similar equipment from other manufacturers






