International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 1822W MF resistance welding inverter, 200 kVA, Imax 64000 A, water cooled

The TECNA 1822W is a medium frequency inverter for spot and projection welding machines, controlled by the Sensum system. It is rated at 200 kVA with an Imax of 64000 A and is water cooled, suiting press machines that weld nuts and studs onto sheet.

Brand
TECNA
Country of manufacture
Italy
Model
1822W
Line
1818:24

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The TECNA 1822W occupies the upper middle of the 1818:24 line, rated at 200 kVA with a maximum current Imax of 64000 A. That is enough for press-type spot and projection welding machines that weld nuts and studs onto sheet, or that weld several projections in a single stroke. Cooling is by water, and the unit is made in Italy.

The inverter feeds the welding transformer at a raised frequency, and after the rectifier the electrodes get direct current. In projection welding this matters: the projections collapse evenly because the current does not dip in the gaps between half-cycles of the mains, as it does on AC machines.

TECNA applies Sensum control across its industrial resistance welding equipment. In the maker's catalogue Sensum inverters appear together with in-line MF machines, press and gantry machines, and robotic tongs, so the 1822W is usually supplied with equipment of the same brand.

A water circuit has to carry heat away from the power section during long runs. Provide water supply and drain during installation, and before start-up confirm the circuit is full and that water actually flows through the inverter. The inverter is not run at working duty without water circulation.

To choose between the 1822W and its neighbours in the line, send a drawing or photo of the part, the material and thickness, the number of spots or projections, and details of the machine and transformer. These let us confirm whether a current up to 64000 A is needed and whether the workshop mains can carry a 200 kVA load.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model1822W
Line1818:24
Typemedium frequency (MF) inverter for resistance welding
Power200 kVA
Imax64000 A
Coolingwater
Control systemSensum

Request a price and lead time

TECNA 1822W MF resistance welding inverter, 200 kVA, Imax 64000 A, water cooled. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Which machines is the TECNA 1822W intended for?

Spot and projection welding machines that need a current of up to 64000 A at a rating of 200 kVA.

What cooling does the 1822W use?

Water cooling, connected to the cooling water circuit of the machine or the workshop.

Which control system does it run on?

Sensum from TECNA, and compatibility with the machine and transformer is checked against the 1822W code.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides