International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 1821W medium frequency welding inverter, 160 kVA, Imax 42000 A

The TECNA 1821W is an Italian-built medium frequency inverter for resistance welding machines, operated by the Sensum control system. It is rated at 160 kVA with a maximum current Imax of 42000 A, and it is water cooled.

Brand
TECNA
Country of manufacture
Italy
Model
1821W
Range
1818:24

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The TECNA 1821W is a medium frequency inverter that supplies the welding transformer of a resistance welding machine. It belongs to the MF inverter line that the manufacturer designates 1818:24, and within that line it is distinguished by a rating of 160 kVA and a maximum current Imax of 42000 A. Cooling is by water, and the unit is made in Italy.

The 1821W runs under the Sensum control system, the name under which TECNA supplies its inverters and resistance welding technology. The inverter can therefore be paired with machines and welding tongs from the same manufacturer where Sensum is already in use.

In a medium frequency circuit the inverter converts the mains voltage into an alternating voltage at a higher frequency and feeds it to a transformer with a rectifier. The welding circuit then carries direct current, and the transformer is smaller and lighter than one working at mains frequency. For spot and projection welding this gives an even current throughout the pulse.

Water cooling removes heat from the power section, so the inverter must be connected to the cooling water circuit of the machine or the workshop. Without water the 1821W does not run at its rated duties, and this must be allowed for during installation. Before start-up, check that the circuit is full and that water is circulating through the inverter. The ratings of 160 kVA and 42000 A determine which transformer and secondary circuit the inverter can work with, so compatibility should be checked against the machine it will serve.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model1821W
Range1818:24
Typemedium frequency (MF) inverter for resistance welding
Power160 kVA
Imax42000 A
Coolingwater
Control systemSensum

Request a price and lead time

TECNA 1821W medium frequency welding inverter, 160 kVA, Imax 42000 A. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What is the maximum current of the TECNA 1821W?

The Imax is 42000 A at a rating of 160 kVA.

What cooling does the inverter need?

Water cooling, so the inverter must be connected to the cooling water circuit of the machine or the workshop.

Which control system does the 1821W use?

The Sensum system from TECNA. Compatibility with the transformer and the machine is checked against the 1821W code and the mains parameters.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides