
TECNA 1820W MF resistance welding inverter, 90 kVA, Imax 32000 A, water cooled
The TECNA 1820W is a water cooled medium frequency inverter with Sensum control, built for spot welding tongs and sheet work. It is rated at 90 kVA with an Imax of 32000 A, sitting above the smallest model and below the larger ones in the 1818:24 line.
- Brand
- TECNA
- Country of manufacture
- Italy
- Model
- 1820W
- Line
- 1818:24
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Among the water cooled models in the 1818:24 line, the TECNA 1820W sits at the lower end, rated at 90 kVA with an Imax of 32000 A. It has more power and current than the smallest model, while the larger models have a bigger power section and place a heavier load on the mains. The unit is made in Italy.
Such an inverter is considered for spot welding of medium-thickness sheet parts, for hanging tongs and small press machines where medium frequency power is needed but a large current reserve is not. The final match depends on a calculation for the specific joint and secondary circuit. If a move to thicker stacks is planned later, the current reserve should be checked in advance so the inverter does not need replacing.
The MF supply in the 1820W works like this: mains voltage is converted to an alternating voltage at a higher frequency, and a transformer with rectifier steps it down and delivers direct current to the electrodes. A medium frequency transformer is more compact, so it is easier to fit on tongs or inside a machine housing.
The Sensum system that governs the inverter belongs to TECNA's own resistance welding technology, alongside its control units and measuring instruments. In a workshop with several TECNA machines this simplifies setup, because programmes and monitoring run in one system.
Because the inverter is water cooled, a cooling circuit with supply and drain must be available near the installation point. When you enquire about a TECNA 1820W, state the machine or tongs, the transformer, the mains parameters and a sample part, so that we can confirm whether 90 kVA and 32000 A are enough.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Model | 1820W |
| Line | 1818:24 |
| Type | medium frequency (MF) inverter for resistance welding |
| Power | 90 kVA |
| Imax | 32000 A |
| Cooling | water |
| Control system | Sensum |
Request a price and lead time
TECNA 1820W MF resistance welding inverter, 90 kVA, Imax 32000 A, water cooled. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What power and maximum current does the TECNA 1820W have?
It is rated at 90 kVA with an Imax of 32000 A.
Does the 1820W need a water connection?
Yes. It is water cooled, so a cooling water circuit with supply and drain is required near the installation point.
Where is the 1820W used?
In industrial spot welding machines and tongs with Sensum control, where the larger current reserve of the top models is not needed.
Similar equipment from other manufacturers






