International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 1819W MF resistance welding inverter, 56 kVA, Imax 25000 A, water cooled

The TECNA 1819W is a medium frequency inverter that powers resistance welding machines and runs on the Sensum control system. It is the smallest of the water cooled inverters in the 1818:24 line, rated at 56 kVA with an Imax of 25000 A.

Brand
TECNA
Country of manufacture
Italy
Model
1819W
Line
1818:24

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Among TECNA water cooled inverters in the 1818:24 line, the 1819W is the lowest in power. The manufacturer gives it as 56 kVA with a maximum current Imax of 25000 A. It suits machines and tongs that do not need a large current reserve but do need medium frequency power and Sensum control. It is made in Italy.

A medium frequency inverter sits between the mains and the welding transformer. It turns the supply voltage into a higher frequency alternating voltage, and the transformer with rectifier steps this down so the electrodes receive direct current. At that frequency the transformer can be smaller and lighter, and the current holds steady throughout each pulse.

Control runs on the Sensum system. Under this name TECNA develops its own resistance welding technology, covering inverters, control units and measuring instruments. If a plant already runs TECNA machines with Sensum, the 1819W follows the same logic for setting up programmes.

Cooling on the 1819W is by water. Connect the inverter to the cooling water circuit of the machine or the workshop, and before the first start check that water really circulates through the power section. For installation, arrange water supply and drain near the mounting point in advance.

When selecting, match the 56 kVA rating and the 25000 A current with the machine transformer and secondary circuit. Quote code 1819W, your mains parameters, the type of machine or tongs, and the joints you plan to weld. If the current reserve falls short, the line includes higher-rated water cooled models.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model1819W
Line1818:24
Typemedium frequency (MF) inverter for resistance welding
Power56 kVA
Imax25000 A
Coolingwater
Control systemSensum

Request a price and lead time

TECNA 1819W MF resistance welding inverter, 56 kVA, Imax 25000 A, water cooled. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What is the maximum current of the TECNA 1819W?

Imax is 25000 A at a rating of 56 kVA.

Does the inverter need water?

Yes, it is water cooled, so it connects to the cooling water circuit of the machine or the workshop.

Which control system does the 1819W use?

It uses TECNA's Sensum system, and compatibility with the transformer and machine should be checked against the 1819W code.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides