International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 1598A medium frequency inverter unit for resistance welding, 1200 A primary

The TECNA 1598A is the larger medium frequency inverter in the 1597 to 1598 pair, made for linear-action resistance welders. It offers a continuous thermal current of 240 A, a primary current up to 1200 A, memory for 300 programmes and air cooling.

Brand
TECNA
Country of manufacture
Italy
Model
1598A
Mains voltage (three phases)
400V – 440V – 460V* – 480V* -20% / +10%

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Against the 1597A, the 1598A carries twice the current, with a continuous thermal current of 240 A and a primary current reaching 1200 A. The cabinet is correspondingly larger at 475 x 455 x 1177 (h). Both units are air cooled, marked (A). The mains supply is three-phase, 400V, 440V, 460V* or 480V* with a tolerance of -20% / +10% at 50/60 Hz, so the unit suits machines on different power systems without a separate transformer.

The inverter runs anywhere from 1000 Hz to 4000 Hz. Up to 300 welding programmes can be stored, each with its own settings. A programme covers current slope up and slope down, pulses, pre-weld and post-weld cycles, and its times are set in steps of 1 ms.

The working modes are conventional, constant current, constant power, constant voltage, FIX, constant energy and DYNAMIC. For quality control the unit keeps limit indicators for current, electrode voltage, energy, power, inverter load percentage, and the starting and final resistance of the material. Thickness and electrode indentation limits are available as options.

A stepper with programmable curves compensates electrode wear, and current and time are corrected independently, each according to its own law. Each programme can hold four stepper variants with four separate point counters. Optional tip dressing can be controlled too, with up to four counters. Outputs cover a proportional solenoid valve, a position sensor and a pyrometer, and the firmware is updated through the maker's software.

The 1598A is fitted to linear-action MF machines and other TECNA resistance welding installations where the smaller 1597A lacks the current. The control functions are the same across the series, so a technologist needs no retraining when a line runs machines with different units.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model1598A
Mains voltage (three phases)400V – 440V – 460V* – 480V* -20% / +10%
Mains frequency50/60 Hz
Max continuous thermal current240A
Max primary current1200 A
Coolingair (A)
Dimensions475 x 455 x 1177 (h)
Inverter frequencyfrom 1000 Hz to 4000 Hz
Programme memoryup to 300
Time setting step1 ms

Request a price and lead time

TECNA 1598A medium frequency inverter unit for resistance welding, 1200 A primary. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

How does the TECNA 1598A differ from the 1597A?

The 1598A has a 240 A continuous thermal current and up to 1200 A primary, double the 1597A, and its cabinet measures 475 x 455 x 1177 (h).

Which mains does the 1598A run on?

A three-phase 400V, 440V, 460V* or 480V* supply with a tolerance of -20% / +10%, at 50/60 Hz.

How is electrode wear compensated?

By a stepper with programmable curves: up to four stepper variants per programme, each with its own point counter, and current and time are corrected independently.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides