International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 1597A compact medium frequency inverter unit for resistance welding, 600 A primary

The TECNA 1597A is the smaller unit in the 1597 to 1598 pair, for resistance welding machines of lower rating. It carries a continuous thermal current of 120 A and a primary current up to 600 A, in an air-cooled cabinet of 475 x 375 x 915 (h).

Brand
TECNA
Country of manufacture
Italy
Model
1597A
Mains voltage (three phases)
400V – 440V – 460V* – 480V* -20% / +10%

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The 1597A holds the lower step of the 1597 to 1598 pair. Its continuous thermal current is 120 A and its primary current runs to 600 A, half the figures of the 1598A. The cabinet is lower and narrower at 475 x 375 x 915 (h), which helps on machines with little room for the electrical cabinet. Cooling is by air, marked (A), so the unit needs no water circuit of its own.

The mains is three-phase, at 400V, 440V, 460V* or 480V* with a tolerance of -20% / +10%, and 50/60 Hz. The same unit therefore serves plants with different supply voltages.

The inverter frequency can be set between 1000 Hz and 4000 Hz, and up to 300 programmes are held in memory. Each one sets current slope up and down, pulses, a pre-weld heating stage and a post-weld stage, with times entered in 1 ms steps.

For different materials and tasks the unit offers conventional, constant current, constant power, constant voltage, FIX, constant energy and DYNAMIC modes. During each spot it monitors the current, electrode voltage, energy and power limits, the percentage of inverter load, and the material resistance at the start and end of the weld. Thickness and indentation limits are an option.

A programmable-curve stepper adjusts current and time as the electrodes wear, each parameter following its own law. Each programme has four stepper variants, each with a point counter, and optional tip dressing adds up to four more counters. The unit provides a proportional solenoid valve output, a position sensor connection and a pyrometer connection, and its firmware is updated in software. The 1597A is fitted to linear-action MF machines and other resistance welders where 600 A on the primary side is sufficient.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model1597A
Mains voltage (three phases)400V – 440V – 460V* – 480V* -20% / +10%
Mains frequency50/60 Hz
Max continuous thermal current120 A
Max primary current600 A
Coolingair (A)
Dimensions475 x 375 x 915 (h)
Inverter frequencyfrom 1000 Hz to 4000 Hz
Programme memoryup to 300
Time setting step1 ms

Request a price and lead time

TECNA 1597A compact medium frequency inverter unit for resistance welding, 600 A primary. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What currents does the TECNA 1597A handle?

A continuous thermal current up to 120 A and a primary current up to 600 A.

How many programmes can the 1597A store?

Up to 300 welding programmes, with times set in steps of 1 ms.

Does the 1597A need water cooling?

No. The 1597A is air cooled, marked (A).

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides