
TECNA 1524RW medium frequency inverter for resistance welding, 1000/4000 Hz
TECNA 1524RW is the last model in the 1518RW-1524RW inverter series for resistance welding. It is a medium frequency IGBT inverter running at 1000 Hz or 4000 Hz, with closed loop regulation. It can be controlled from the TE700 unit or over a field bus.
- Brand
- TECNA
- Country of manufacture
- Italy
- Model
- 1524RW
- Series
- 1518RW-1524RW
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
TECNA lists the 1524RW last in the 1518RW-1524RW inverter series, an Italian medium frequency IGBT inverter for resistance welding machines. The manufacturer does not publish nominal current, power or supply voltage on this model's page, and every model in the series shares the same functions. The choice therefore depends on the class of machine, and the parameters are confirmed with TECNA by designation.
The 1524RW works in a closed loop: primary and secondary currents are adjusted continuously, so fluctuations in the mains or changes in the metal are compensated during welding. Current is monitored with double feedback on both the primary and secondary circuit, and the welding current is set in steps of milliseconds.
In a workshop, the difference from an AC machine shows up in the power supply and in maintenance. An AC machine needs a larger installed power and a higher mains current to produce the same weld. The welding time is shorter, so electrodes need servicing less often and output rises. Medium frequency welding transformers are almost 50% smaller than AC transformers.
The 1524RW offers 15 welding programmes that can be recalled from memory and six regulation modes: constant current, constant power, constant voltage, FIX, constant energy and DYNAMIC. It adjusts itself to the 50/60 Hz mains. Parameters are set from the TE700 control unit or over the communication bus when the inverter runs standalone. An Ethernet RJ45 10/100 Mbit/s port allows programming through the TecnaNet software, and field bus links are available: Profibus, CANopen, DeviceNet, EtherCAT, Profinet and Ethernet IP. Firmware of the control unit is upgraded with the appropriate software, up to 4 position sensors can be handled, and the stepper function compensates electrode wear.
The inverter is intended for projection, seam and pulsed seam welding, spot welding, micro-welding and any process with short weld times. When making an enquiry about the 1524RW, specify the machine, the materials, the mains supply and the communication protocol to the line controller.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Model | 1524RW |
| Series | 1518RW-1524RW |
| Type | medium frequency inverter for resistance welding |
| Power unit | IGBT, medium frequency |
| Inverter operating frequency | 1000 Hz or 4000 Hz |
| Mains frequency | 50/60 Hz, automatic adjustment |
| Regulation | closed loop, double feedback on primary and secondary circuit |
| Work modes | 6: constant current, constant power, constant voltage, FIX, constant energy, DYNAMIC |
| Welding programmes | 15 |
| Control | TE700 control unit or standalone with programming over the bus |
| Ethernet | RJ45 10/100 Mbit/s, TecnaNet software |
| Field buses | Profibus, CANopen, DeviceNet, EtherCAT, Profinet, Ethernet IP |
| Position sensors | up to 4 |
| Stepper function | compensation of electrode wear |
| Transformer | about 50% smaller than AC |
| Applications | projection, seam and pulsed seam, spot welding, micro-welding, short cycles |
Request a price and lead time
TECNA 1524RW medium frequency inverter for resistance welding, 1000/4000 Hz. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What working frequency does the TECNA 1524RW inverter have?
The inverter frequency is selected between 1000 Hz and 4000 Hz. It adjusts itself automatically to the 50/60 Hz mains.
Can it run without the TE700 unit?
Yes, the inverter runs on its own and can be programmed over the communication bus. It can also be programmed through Ethernet RJ45 with the TecnaNet software.
Which processes is the inverter suited to?
It suits spot, projection, seam and pulsed seam welding, micro-welding and processes with short weld times. The stepper function compensates electrode wear.
Similar equipment from other manufacturers






