International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 1523RW medium frequency inverter for resistance welding, 1000/4000 Hz

TECNA 1523RW is a model in the 1518RW-1524RW inverter series, one step below the 1524RW. Medium frequency IGBT control runs at 1000 Hz or 4000 Hz with closed loop regulation. It works from the TE700 unit or standalone over a communication bus.

Brand
TECNA
Country of manufacture
Italy
Model
1523RW
Series
1518RW-1524RW

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

TECNA 1523RW belongs to the 1518RW-1524RW series and ranks one step below the 1524RW. Apart from the designation and the power unit, its neighbours in the series share the same control, modes and interfaces. The manufacturer gives no separate nominal data for the 1523RW, so the model is checked against the machine it is intended for and against the code supplied by TECNA.

The core of the 1523RW is IGBT medium frequency control with a choice of inverter frequency, 1000 Hz or 4000 Hz. The loop is closed: current is measured on both the primary and secondary side, so variations in mains voltage and differences between batches of material are compensated automatically. Current is adjusted in milliseconds.

Compared with an AC machine, medium frequency transfers heat into the weld more effectively. The same result is reached in less time, and the heat-affected zone around the nugget is smaller, without changing the properties of the material. The transformers for an inverter are very compact, almost 50% smaller than AC transformers, and the AC system would need a larger installed power and a larger mains current for the same result.

Control can come from the TE700 unit, or the inverter can run without it, programmed over the bus. It offers 15 welding programmes and six modes: constant current, constant power, constant voltage, FIX, constant energy and DYNAMIC. The 50/60 Hz mains frequency is detected automatically, and the working frequency of 1000 Hz or 4000 Hz is selected for the task. Communication with the upper level runs over Profibus, CANopen, DeviceNet, EtherCAT, Profinet or Ethernet IP, and the inverter can be programmed from a PC through Ethernet RJ45 10/100 Mbit/s with TecnaNet. The stepper function compensates electrode wear between dressings, up to 4 position sensors have inputs, and the control unit firmware can be upgraded.

The applications are projection welding, seam and pulsed seam welding, micro-welding, spot welding and processes with short weld times. To confirm the 1523RW for your machine, give the machine type, the material and thickness of the parts, the mains voltage, and whether a bus link to the line is required.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model1523RW
Series1518RW-1524RW
Typemedium frequency inverter for resistance welding
Power unitIGBT, medium frequency
Inverter operating frequency1000 Hz or 4000 Hz
Mains frequency50/60 Hz, automatic adjustment
Regulationclosed loop, double feedback on primary and secondary circuit
Work modes6: constant current, constant power, constant voltage, FIX, constant energy, DYNAMIC
Welding programmes15
ControlTE700 control unit or standalone with programming over the bus
EthernetRJ45 10/100 Mbit/s, TecnaNet software
Field busesProfibus, CANopen, DeviceNet, EtherCAT, Profinet, Ethernet IP
Position sensorsup to 4
Stepper functioncompensation of electrode wear
Transformerabout 50% smaller than AC
Applicationsprojection, seam and pulsed seam, spot welding, micro-welding, short cycles

Request a price and lead time

TECNA 1523RW medium frequency inverter for resistance welding, 1000/4000 Hz. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What working frequency does the TECNA 1523RW have?

The inverter frequency is chosen between 1000 Hz and 4000 Hz. It adjusts automatically to a 50/60 Hz mains.

Can the 1523RW run without the TE700 unit?

Yes, it works standalone with programming over the communication bus. It can also be programmed through Ethernet RJ45 with TecnaNet.

Which processes suit the 1523RW?

Spot, projection, seam and pulsed seam welding, micro-welding and processes with short weld times. The stepper function compensates electrode wear.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides