
TECNA 1522RW medium frequency inverter for resistance welding, 1000/4000 Hz
TECNA 1522RW belongs to the 1518RW-1524RW inverter series for resistance welding machines. Its closed loop regulation uses double feedback on the primary and secondary circuits. Frequency is 1000 Hz or 4000 Hz, with control from the TE700 unit or over a field bus.
- Brand
- TECNA
- Country of manufacture
- Italy
- Model
- 1522RW
- Series
- 1518RW-1524RW
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The TECNA 1522RW is a member of the 1518RW-1524RW inverter series and sits between the 1518RW and the 1524RW. All models in the series share one set of functions, and the designation tells TECNA which power unit to fit. Nominal current, power and supply voltage for the 1522RW are not stated on the model page, so these are confirmed with the manufacturer against the model code.
Regulation follows a closed loop with double feedback, so the inverter reads both the primary and the secondary current. When the mains sags or the metal changes, the current is readjusted continuously, which keeps the quality of each spot steady. The welding current is set in millisecond steps.
Medium frequency puts heat into the weld more efficiently than AC at mains frequency. The nugget forms faster, less heat spreads into the surrounding zone, and the metal around the spot keeps its properties. Shorter cycles mean less electrode wear and lower running costs, and the transformer is compact, almost 50% smaller than an AC unit.
Six work modes are available: constant current, constant power, constant voltage, FIX, constant energy and DYNAMIC. Fifteen welding programmes can be recalled. The operating frequency is 1000 Hz or 4000 Hz, and the inverter adjusts itself to the 50/60 Hz mains. Control comes from the TE700 unit or from the communication bus when the inverter runs standalone. For a PC there is an Ethernet RJ45 10/100 Mbit/s port with the TecnaNet software, up to 4 position sensors connect to the inverter, the stepper raises current gradually as electrodes wear, and the firmware is updated in software.
The 1522RW is intended for projection, seam and pulsed seam welding, spot welding, micro-welding and processes with short weld times. It links to a line controller over Profibus, CANopen, DeviceNet, EtherCAT, Profinet or Ethernet IP, whichever field bus you choose. To confirm the 1522RW for your machine, give the machine type, the mains voltage, the materials of the parts and the chosen field bus.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Model | 1522RW |
| Series | 1518RW-1524RW |
| Type | medium frequency inverter for resistance welding |
| Power unit | IGBT, medium frequency |
| Inverter operating frequency | 1000 Hz or 4000 Hz |
| Mains frequency | 50/60 Hz, automatic adjustment |
| Regulation | closed loop, double feedback on primary and secondary circuit |
| Work modes | 6: constant current, constant power, constant voltage, FIX, constant energy, DYNAMIC |
| Welding programmes | 15 |
| Control | TE700 control unit or standalone with programming over the bus |
| Ethernet | RJ45 10/100 Mbit/s, TecnaNet software |
| Field buses | Profibus, CANopen, DeviceNet, EtherCAT, Profinet, Ethernet IP |
| Position sensors | up to 4 |
| Stepper function | compensation of electrode wear |
| Transformer | about 50% smaller than AC |
| Applications | projection, seam and pulsed seam, spot welding, micro-welding, short cycles |
Request a price and lead time
TECNA 1522RW medium frequency inverter for resistance welding, 1000/4000 Hz. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What working frequency does the TECNA 1522RW have?
The frequency is chosen between 1000 Hz and 4000 Hz. The inverter adjusts itself automatically to a 50/60 Hz mains.
Can the 1522RW work without the TE700 unit?
Yes, the inverter runs on its own with programming over the communication bus. It can also be programmed through Ethernet RJ45 with the TecnaNet software.
Which work does the 1522RW suit?
It suits spot, projection, seam and pulsed seam welding, micro-welding and processes with short weld times. The stepper function compensates electrode wear.
Similar equipment from other manufacturers






