International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 1521RW medium frequency inverter for resistance welding, IGBT 1000/4000 Hz

TECNA 1521RW from the 1518RW-1524RW series controls the welding current of resistance welding machines at medium frequency. It suits spot, projection and seam welding and micro-welding where short cycles and precise regulation are needed.

Brand
TECNA
Country of manufacture
Italy
Model
1521RW
Series
1518RW-1524RW

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The TECNA 1521RW is an Italian medium frequency inverter from the 1518RW-1524RW series. The manufacturer describes one set of functions for every model in this range, so the page does not spell out how the 1521RW differs from its neighbours. Power, current and supply voltage for this version are confirmed with TECNA against the model code, while the technology and control are the same across the series.

At the heart of the 1521RW is a closed loop regulator. The inverter continuously corrects the primary and secondary current, which offsets fluctuations in the mains and changes in the metal being welded. Current is monitored with double feedback on both circuits and is set in millisecond steps. On a shop floor with unstable mains, that means the same quality from one part to the next.

The power stage uses medium frequency IGBTs with a choice of 1000 Hz or 4000 Hz. Compared with an AC machine, medium frequency delivers heat more efficiently: the same result is reached in less time, and the heat-affected zone around the nugget is smaller, without harming the material. Welding transformers for this frequency are compact, which TECNA puts at almost 50% smaller than AC transformers.

An AC system would need more installed power and more mains current for the same weld. The shorter weld time reduces electrode servicing and improves output. The stepper function compensates electrode wear, and up to 4 position sensors can be connected to the inverter.

The 1521RW has six modes: constant current, constant power, constant voltage, FIX, constant energy and DYNAMIC, and it holds 15 programmes for recall. It adapts to the 50/60 Hz mains frequency. It is programmed from the TE700 control unit or over the communication bus, with an Ethernet RJ45 10/100 Mbit/s port for TecnaNet and links to Profibus, CANopen, DeviceNet, EtherCAT, Profinet or Ethernet IP. Firmware is upgraded in software. The stated applications are projection, seam and pulsed seam welding, micro-welding, spot welding and processes with a very short current flow time.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model1521RW
Series1518RW-1524RW
Typemedium frequency inverter for resistance welding
Technologyclosed loop regulation, medium frequency IGBT
Inverter operating frequency1000 Hz or 4000 Hz, selectable
Feedbackdouble, primary and secondary circuit
Current regulationin millisecond steps
Work modes6: constant current, constant power, constant voltage, FIX, constant energy, DYNAMIC
Welding programmes15 available for recall
Mains frequency50/60 Hz, automatic adjustment
ProgrammingTE700 control unit or standalone over the communication bus
EthernetRJ45 10/100 Mbit/s, TecnaNet software
Field busesProfibus, CANopen, DeviceNet, EtherCAT, Profinet, Ethernet IP
Position sensorsup to 4
Stepper functioncompensation of electrode wear
Firmwareupgrade via software
Welding transformersabout 50% smaller than AC transformers
Applicationsprojection, seam and pulsed seam, micro-welding, spot, short weld times

Request a price and lead time

TECNA 1521RW medium frequency inverter for resistance welding, IGBT 1000/4000 Hz. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What working frequency does the TECNA 1521RW have?

The frequency is chosen between 1000 Hz and 4000 Hz, and the power stage is built on medium frequency IGBTs.

Does the 1521RW need a separate control unit?

No, the inverter also runs standalone with programming over the communication bus. Where a panel is needed, it is programmed from the TE700 control unit.

Which work does the 1521RW suit?

Spot, projection, seam and pulsed seam welding, micro-welding and processes with a short weld time.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides