International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 1520RW medium frequency inverter for resistance welding with Ethernet and field buses

TECNA 1520RW from the 1518RW-1524RW series controls the current of medium frequency resistance welding machines. It is built into automated lines, runs standalone or is programmed over the bus, and connects to Ethernet and field buses.

Brand
TECNA
Country of manufacture
Italy
Model
1520RW
Series
1518RW-1524RW

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The TECNA 1520RW belongs to the 1518RW-1524RW series, for which the Italian manufacturer publishes one shared description with no separate figures for each model. The page therefore does not set out how the 1520RW differs from its neighbours, and its power, current and supply voltage are confirmed with TECNA against the code. Functions, modes and interfaces are the same across the series.

For an automated line, the key question is how the 1520RW is integrated. It can work without a separate panel, with programming sent over the communication bus, and it links to the line controller over Profibus, CANopen, DeviceNet, EtherCAT, Profinet or Ethernet IP. An Ethernet RJ45 10/100 Mbit/s port with the TecnaNet software is available for setup from a computer. Where the machine needs its own panel, the TE700 control unit is fitted. Firmware is updated with the relevant software, with no board replacement needed.

Fifteen welding programmes can be called from the line, and six modes are available: constant current, constant power, constant voltage, FIX, constant energy and DYNAMIC. Up to 4 position sensors connect directly to the inverter, and the stepper function gradually changes the parameters as electrodes wear. The inverter detects the 50/60 Hz mains by itself.

Regulation runs in a closed loop: primary and secondary currents are corrected continuously, and double feedback on both circuits holds the current accurately, in steps of milliseconds. Fluctuations in the mains and differences between batches of metal are compensated, so joint quality stays stable.

The IGBT medium frequency stage works at 1000 Hz or 4000 Hz. Heat is generated in the weld zone more efficiently than in an AC machine, so the spot forms faster and the heat-affected zone is narrower. The transformers are almost 50% smaller than AC units, and the supply and installed power needed for the same result are lower. Applications are projection, seam and pulsed seam welding, micro-welding, spot welding and processes with short times.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model1520RW
Series1518RW-1524RW
Typemedium frequency inverter for resistance welding
Technologyclosed loop regulation, medium frequency IGBT
Inverter operating frequency1000 Hz or 4000 Hz, selectable
Feedbackdouble, primary and secondary circuit
Current regulationin millisecond steps
Work modes6: constant current, constant power, constant voltage, FIX, constant energy, DYNAMIC
Welding programmes15 available for recall
Mains frequency50/60 Hz, automatic adjustment
ProgrammingTE700 control unit or standalone over the communication bus
EthernetRJ45 10/100 Mbit/s, TecnaNet software
Field busesProfibus, CANopen, DeviceNet, EtherCAT, Profinet, Ethernet IP
Position sensorsup to 4
Stepper functioncompensation of electrode wear
Firmwareupgrade via software
Welding transformersabout 50% smaller than AC transformers
Applicationsprojection, seam and pulsed seam, micro-welding, spot, short weld times

Request a price and lead time

TECNA 1520RW medium frequency inverter for resistance welding with Ethernet and field buses. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Which field buses does the TECNA 1520RW connect to?

It connects to Profibus, CANopen, DeviceNet, EtherCAT, Profinet and Ethernet IP. For setup from a computer, an Ethernet RJ45 10/100 Mbit/s port with the TecnaNet software is available.

How many modes and programmes does the 1520RW have?

It has six modes, from constant current to DYNAMIC, and 15 welding programmes that can be recalled.

Does the 1520RW work on a 60 Hz mains?

Yes, it adjusts itself automatically to the 50/60 Hz mains frequency.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides