
PM PLUS™ panel-mount PID controller with built-in limit, outputs up to 15A NO-ARC
A panel controller for temperature and process loops, supplied either as a straight PID unit or as an integrated unit that also carries an over-temperature limit. Four DIN sizes, ramp and soak profiling, fieldbus options and Bluetooth® set-up from a phone.
- Type
- PID controller / integrated controller with limit
- Sizes
- 1/16 DIN, 1/8 DIN (vertical), 1/8 DIN (horizontal), 1/4 DIN
- Control/limit loops
- 1 or 2
- Maximum output
- 15A NO-ARC
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Heater current, profile steps and an over-temperature cut-out can all live in one front-panel instrument with this series. Typical homes are furnace and oven panels, curing and drying lines, plastics machinery and test rigs where an engineer wants a PID loop and, on chosen models, a safety limit without fitting a second box.
Outputs are picked at the ordering stage. The heaviest is a 15A NO-ARC relay; alternatives include a 5A Form C mechanical relay, a 0.5A Form A solid state relay, switched DC or open collector, and a universal process output. Supply is either 100 to 240 V AC, or 20 to 28 V AC / 12 to 40 V DC on the low-voltage build. Heater current can be watched through a current transformer input rated 0–50 mA, and a second PID channel with universal or thermistor input can be added.
The range comes as PM6 PLUS for 1/16 DIN cut-outs, PM8 PLUS and PM9 PLUS for 1/8 DIN in vertical and horizontal orientation, and PM4 PLUS for 1/4 DIN. Each has an LCD and a SMOOTH-TOUCH™ keypad, with menus in English, German and Spanish. Firmware covers TRU-TUNE®+ adaptive tuning, alarms, profiles of up to 40 steps, calibration offset at 10 points, square-root, ratio and differential functions, motorised valve control without feedback and a countdown timer.
On the network side there is Modbus® RTU 232/485, EtherNet/IP™, Modbus® TCP, PROFIBUS DP, DeviceNet™ and SAE J1939 CAN bus. Bluetooth® with the EZ-LINK™ app handles commissioning without a programming lead. The series is backwards compatible with earlier EZ-ZONE® PM units, so a panel retrofit is straightforward. Listed approvals are UL®, CSA, CE, RoHS, W.E.E.E., FM and SEMI F47-0200, with Class 1, Div. 2 on selected models.
Technical specifications
| Type | PID controller / integrated controller with limit |
|---|---|
| Sizes | 1/16 DIN, 1/8 DIN (vertical), 1/8 DIN (horizontal), 1/4 DIN |
| Control/limit loops | 1 or 2 |
| Maximum output | 15A NO-ARC |
| Other outputs | switched DC / open collector, 5A Form C relay, 0.5A Form A SSR, universal process |
| Supply | 100–240 V AC; 20–28 V AC or 12–40 V DC |
| Profiling | 40 ramp/soak steps |
| Current transformer input | 0–50 mA |
| Adaptive control | TRU-TUNE®+ |
| Display and keypad | LCD, SMOOTH-TOUCH™ |
| Communications | Bluetooth®, Modbus® RTU 232/485, EtherNet/IP™, Modbus® TCP, PROFIBUS DP, DeviceNet™, SAE J1939 CAN |
| Approvals | UL®, CSA, CE, RoHS, W.E.E.E., FM, SEMI F47-0200, Class 1 Div. 2 (selected models) |
Request a price and lead time
PM PLUS™ panel-mount PID controller with built-in limit, outputs up to 15A NO-ARC. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Will a PM PLUS™ unit replace an existing EZ-ZONE® PM controller?
Yes, the series is backwards compatible with the earlier EZ-ZONE® PM. Choose the same DIN size to keep the existing panel cut-out.
What load can the controller switch directly?
The largest option is a 15A NO-ARC relay. Smaller loads can use the 5A Form C relay, the 0.5A Form A SSR, or switched DC and open collector outputs to drive external power devices.
Is over-temperature protection available in the same case?
Selected models include an integrated limit controller with a universal input. It runs as a separate limit loop alongside the PID loop.
Similar equipment from other manufacturers






