International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

EPack Lite Compact SCR Power Controllers, 1PH, 2PH and 3PH Versions, 100 V to 500 V

Three compact thyristor power controllers with a pared-back feature set for heater control: Lite-1PH for single phase, Lite-2PH for two-leg three-phase control and Lite-3PH for full three-leg control. All suit fixed resistive loads, transformer primaries and short-wave infrared emitters.

Versions
1PH (single phase), 2PH (three phase, 2-leg control), 3PH (three phase, 3-leg control)
Supply voltage
100 V to 500 V, adjustable within one variant
Load types
fixed resistive, transformer primary, short-wave infrared
Control mode
V², I², open loop

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Choosing between the three versions comes down to the load. The Lite-1PH handles a single-phase fixed resistive load, a transformer primary or short-wave infrared emitters. The Lite-2PH controls a three-phase load on two legs, which suits balanced loads fed directly or through a transformer; with burst firing it generates no harmonics and draws less reactive power. The Lite-3PH switches all three legs in synchronism, so accuracy holds even when the phases are unbalanced, and its current and voltage measurement gives fuller diagnostics for alarm handling.

One variant covers supply voltages from 100 V to 500 V, set on site rather than ordered separately. Control can be V², I² or open loop. Firing options run from phase angle and intelligent half cycle through variable modulation burst firing and fixed modulation period to logic mode, so the switching pattern can be matched to the heater. Current, voltage, impedance and further values are measured internally, and partial load failure is picked up down to 1 element in 6. The short-circuit current rating is 100 kA when fused.

Set-up is done on the front display, either step by step with QuickStart or in one go by entering a Clone Code taken from an existing unit. That keeps commissioning short for panel builders and makes like-for-like replacement straightforward for plant engineers.

On compliance, safety and EMC are to IEC / EN 60947-4-3:2014 (emissions Class A), with vibration and shock to IEC / EN 60947-1 annex Q category E. North American listing is to UL 60947-4-1 and CAN/CSA C22.2 No. 60947-4-1-14, and the RCM mark applies in Australia. Enclosure protection is IP10 or IP20 to EN 60529 depending on the version. Where a process needs more communications or complex load management, the full EPack range is the step up.

Technical specifications

Versions1PH (single phase), 2PH (three phase, 2-leg control), 3PH (three phase, 3-leg control)
Supply voltage100 V to 500 V, adjustable within one variant
Load typesfixed resistive, transformer primary, short-wave infrared
Control modeV², I², open loop
Firing modesphase angle, intelligent half cycle, variable modulation burst firing, fixed modulation period, logic
Measurementscurrent, voltage, impedance and more
Partial load failure detectiondown to 1 element in 6
SCCR100 kA with fuse
Safety and EMCIEC / EN 60947-4-3:2014, Class A
Vibration and shockIEC / EN 60947-1 annex Q, category E
North AmericaUL 60947-4-1, CAN/CSA C22.2 No. 60947-4-1-14
ProtectionIP10 or IP20 to EN 60529

Request a price and lead time

EPack Lite Compact SCR Power Controllers, 1PH, 2PH and 3PH Versions, 100 V to 500 V. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

When should I pick the 2PH rather than the 3PH?

The 2PH controls two legs and suits balanced three-phase loads; the 3PH controls all three legs and keeps accuracy on unbalanced loads.

What supply voltage does EPack Lite accept?

Anything from 100 V to 500 V, adjustable within the same variant, so one part number covers several mains voltages.

Which standards does it meet?

IEC / EN 60947-4-3:2014 for safety and EMC, IEC / EN 60947-1 annex Q for vibration and shock, plus UL 60947-4-1 and CAN/CSA C22.2 No. 60947-4-1-14.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides