
DIN-A-MITE C SCR heater power controller, 30–80 A, up to 600 V, single or three phase
The higher-current member of the compact DIN-A-MITE family, switching 30 to 80 A depending on model. It covers single-phase and three-phase heater circuits up to 600 V AC and mounts on DIN rail, a panel or through the cabinet wall.
- Switching current
- 30–80 A depending on model
- Circuits
- 1 phase; 3 phase, 2 or 3 legs
- Voltage
- up to 600 V AC
- Output firing
- zero-cross or phase angle (1 phase)
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Cooling options shape the range. Natural-convection, fan-cooled and through-wall versions are offered, the last placing the heat sink outside the enclosure. Fan-cooled units shut the output down if the fan is blocked or fails, and the fan itself draws 0.14 A at 24 V DC, 0.12 A at 120 V AC or 0.06 A at 240 V AC.
Circuits can be single-phase, three-phase with two legs switched, or three-phase with all three legs switched, at up to 600 V AC. Current capacity runs from 30 A to 80 A according to the model ordered.
For command signals there is a zero-cross variable time base, a linear voltage or current process input, or a VAC/VDC contactor input. Single-phase models are also available with phase-angle firing, with or without current limiting, and a dedicated LED shows when the limit is active. Some zero-cross models detect a shorted SCR or an open heater. The model number defines the configuration.
Fuse selection uses an I²t of 9100 A²s. Fitted with the recommended semiconductor fuses, the controller holds a 200 kA short-circuit current rating, tested up to 480 V. It has been shock tested to IEC 60068-2-32 and vibration tested to IEC 60068-2-6, and control terminals take 0.2–1.5 mm² wire. Approvals are UL 508, C-UL, CE with filter and RoHS 2; ambient operating limit is 80 °C.
Technical specifications
| Switching current | 30–80 A depending on model |
|---|---|
| Circuits | 1 phase; 3 phase, 2 or 3 legs |
| Voltage | up to 600 V AC |
| Output firing | zero-cross or phase angle (1 phase) |
| Command input | variable time base, linear voltage/current, VAC/VDC |
| Options | current limit, shorted SCR, open heater |
| Cooling | natural, fan, through-wall |
| I²t for fusing | 9100 A²s |
| SCCR | 200 kA to 480 V with fuses |
| Shock / vibration | IEC 60068-2-32 / IEC 60068-2-6 |
| Mounting | DIN rail, panel, through-wall |
| Ambient temperature | up to 80 °C |
| Approvals | UL 508, C-UL, CE, RoHS 2 |
Request a price and lead time
DIN-A-MITE C SCR heater power controller, 30–80 A, up to 600 V, single or three phase. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What current does DIN-A-MITE C handle?
Between 30 and 80 A depending on model and cooling, in single-phase or three-phase circuits up to 600 V AC.
Is phase-angle control available?
Yes, single-phase models can be ordered with phase-angle firing, including a current-limit version.
What if the cooling fan stops?
On fan-cooled models an over-temperature function switches the output off when the fan is blocked or has failed.
Similar equipment from other manufacturers






