International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

ASPYRE® DT SCR power controller, 35 A to 2100 A

A modular family of SCR power controllers for electric heating, rated from 35 A up to 2100 A. One platform covers many heater types and machine builds, with several firing modes, diagnostics and fieldbus options.

Rated current
35–2100 A
Switching device
SCR (thyristor)
Frame ratings
35–40 A, 60 A, 90–210 A, 300–700 A
Controlled legs
1, 2 or 3

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Five firing modes sit inside the ASPYRE® DT: zero cross, burst firing, single cycle, delayed triggering and phase angle. Pick the one that suits the element, and the same controller will run nichrome, moly, silicon carbide, tungsten quartz and infrared lamp heaters, or loads fed through a transformer.

Each unit is put together from modules: one, two or three controlled legs, semiconductor fusing, load current measurement, the current rating and the operator interface. Frame sizes DT1, DT2 and DT3 cover 35–40 A, 60 A, 90–210 A and 300–700 A, and the family as a whole reaches 2100 A. Fieldbus links are PROFIBUS, PROFINET and EtherNet/IP; settings are made with a configurator tool and firmware can be updated in the field.

Built-in diagnostics and the fieldbus options are aimed at machine and factory automation, and the modular build means an equipment maker can reuse the same platform across a wide range of applications rather than qualifying a new power stage for each machine.

The controller is UL listed to ANSI/UL 508 for industrial control switches, equivalent to CSA C22.2 #14, and complies with the relevant EU directives. It is rated IP20, so it must sit inside an enclosure that gives the extra protection the site needs. Connect the protective earth terminal and check earthing impedance periodically. After isolating the supply, allow at least one minute for internal capacitors to discharge before touching power connections. The manufacturer excludes aerospace and nuclear use.

Technical specifications

Rated current35–2100 A
Switching deviceSCR (thyristor)
Frame ratings35–40 A, 60 A, 90–210 A, 300–700 A
Controlled legs1, 2 or 3
Firing modeszero cross, burst, single cycle, delayed triggering, phase angle
Loadsnichrome, moly, silicon carbide, tungsten quartz, IR lamps, transformer-coupled
Optionssemiconductor fusing, load current measurement, operator interface
FieldbusPROFIBUS, PROFINET, EtherNet/IP
Ingress protectionIP20 (enclosure mounting)
ComplianceANSI/UL 508, CSA C22.2 #14, EU directives

Request a price and lead time

ASPYRE® DT SCR power controller, 35 A to 2100 A. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Which heater types can the ASPYRE® DT drive?

Nichrome, moly, silicon carbide, tungsten quartz and infrared lamp elements, plus transformer-coupled loads.

Does it handle three-phase loads?

Yes, it is configured with one, two or three controlled legs; the DT1, DT2 and DT3 frames span 35 A to 700 A and the wider family goes to 2100 A.

How does it connect to a PLC?

Over PROFIBUS, PROFINET or EtherNet/IP, with device description files supplied by the manufacturer for each network.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides