
ASPYRE® AT SCR Power Controllers, 35 to 2100 A
A family of compact, scalable thyristor power controllers for electric heating, rated from 35 to 2100 A. Each unit regulates on voltage, current or power in closed loop and reports heater and SCR faults.
- Type
- SCR power controller
- Rated current
- 35–2100 A
- Control
- closed loop on voltage, current or power
- Firing modes
- zero-cross, burst fire, phase angle, soft start
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Wiring is often the hidden cost in a multi-zone heating panel. ASPYRE® AT tackles it by plugging into the manufacturer's EZ-ZONE® RM, PM PLUS® and RMA PLUS™ temperature controllers over a high-speed backplane, so one connection point can serve up to 16 power controllers. Plant-level communication then runs over Modbus® TCP, EtherNet/IP™ or EtherCAT®, and the manufacturer quotes a reduction of more than 60% in wiring compared with other multi-zone systems.
The power stage uses SCRs, with rated currents from 35 to 2100 A. Regulation is closed loop on voltage, current or power, which compensates for mains fluctuations and for tolerances in heater wattage and insulation. Firing modes include zero-cross, burst fire, phase angle and soft start. Current and voltage are measured internally, so no external current transformers are required.
Fault diagnostics flag an open heater or a shorted SCR, and a heater bakeout function dries out damp elements gently at start-up. Configuration is done over USB, with the electronics powered from the port, so settings can be changed with the panel's high voltage switched off.
The unit carries a 100KA short-circuit current rating and is c-UL® 508 Listed. With IP20 protection it must sit inside an enclosure; utilisation categories are AC-51, AC-55b and AC-56a, installation category III, pollution degree 2, and the auxiliary supply is 24 Vdc. Cooling is by DIN-rail heat sink or base plate. Earth the controller through its protective terminal and protect the supply with circuit breakers or fuses. It is not intended for aerospace or nuclear use.
Technical specifications
| Type | SCR power controller |
|---|---|
| Rated current | 35–2100 A |
| Control | closed loop on voltage, current or power |
| Firing modes | zero-cross, burst fire, phase angle, soft start |
| Short-circuit current rating (SCCR) | 100KA |
| Approval | c-UL® 508 Listed |
| Protection rating | IP20 |
| Utilisation categories | AC-51, AC-55b, AC-56a |
| Auxiliary supply | 24 Vdc +10, -15% |
| System networks | Modbus® TCP, EtherNet/IP™, EtherCAT® (via controllers) |
| Configuration | USB |
| Cooling | DIN-rail heat sink or base plate |
Request a price and lead time
ASPYRE® AT SCR Power Controllers, 35 to 2100 A. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What current range does the family cover?
ASPYRE® AT controllers are rated from 35 to 2100 A.
Are external current transformers needed?
No, current and voltage measurement is built in, so separate CTs and their wiring are not required.
Can it work with several heater types?
Yes, zero-cross, burst fire, phase angle and soft start firing let it handle a wide mix of loads while easing heaters in at start-up.
Similar equipment from other manufacturers






