
3000TB trace oxygen analyser, bulkhead-mounted, micro-fuel cell sensor
A bulkhead-mounted instrument for reading very low oxygen levels in process and high-purity gases. The 3000TB family turns up on air separation plants, petrochemical units, semiconductor fabs and tank blanketing duties.
- Measured component
- oxygen, trace levels
- Measuring principle
- micro-fuel cell
- Ranges
- three, user-definable
- Display
- digital meter, alphanumeric VFD
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
At the heart of the 3000TB sits an electrochemical micro-fuel cell. Oxygen reaching the cell reacts at its electrodes and produces a current in proportion to concentration, so there are no pumps or optics to look after; when the cell is spent, it is simply swapped. The operator sets up three ranges of their own choosing, and a separate range ID signal tells the control system which one is active. Readings appear on a digital meter and a vacuum fluorescent alphanumeric screen, with a CMOS microprocessor doing the work.
Typical duties include air separation and liquefaction, monitoring chemical reactions, petrochemical process control, semiconductor production, checking inert gas blanketing on vessels, quality assurance and certification of gas mixtures. Each of these needs early warning when oxygen creeps into a stream that should be nearly free of it.
Three build options are offered. The standard 3000TB is a general-purpose unit for a wall or panel. Where the sample point lies in a hazardous area, the split 3010TB places an explosion-proof analysis unit near the process and leaves the control unit in a safe room. The 3000TB-XL-C variant adds dedicated zero and span ports plus built-in solenoid valves, so calibration gas can be switched without anyone touching the pipework.
The control unit housing is sheet steel rated NEMA 4/7. The 3010TB analysis unit is UL and CSA listed for Class I, Division 1, Groups B, C and D. Under CE marking the instrument meets EN61010-1, EN50082-2 and EN55011 Class A.
Technical specifications
| Measured component | oxygen, trace levels |
|---|---|
| Measuring principle | micro-fuel cell |
| Ranges | three, user-definable |
| Display | digital meter, alphanumeric VFD |
| Mounting | bulkhead |
| Control unit housing | sheet steel, NEMA 4/7 |
| 3010TB version | split, explosion-proof analysis unit |
| 3010TB hazardous area listing | UL, CSA, Class I, Division 1, Groups B, C, D |
| 3000TB-XL-C version | zero/span ports, built-in solenoid valves |
| CE compliance | EN61010-1, EN50082-2, EN55011 Class A |
Request a price and lead time
3000TB trace oxygen analyser, bulkhead-mounted, micro-fuel cell sensor. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Can the 3000TB go into a hazardous area?
The standard 3000TB is for general-purpose locations. For hazardous zones choose the split 3010TB, whose analysis unit is UL and CSA listed for Class I, Division 1, Groups B, C and D.
What kind of sensor does it use?
An electrochemical micro-fuel cell that responds to oxygen in the sample. It is treated as a consumable and replaced at the end of its life.
Is automatic calibration available?
Yes. The 3000TB-XL-C variant has separate zero and span gas ports with built-in solenoid valves to switch between them.
Similar equipment from other manufacturers






