
Vesselet Integrally Reinforced Insert Branch Fitting, Outlet up to 60 Inches
The Vesselet is butt welded into the run pipe to form a branch with a contoured integral reinforcement. Outlets come with butt-welded, socket-welded, threaded or flanged ends and reach 60 inches in size.
- Type
- integrally reinforced insert branch fitting
- Sizes
- NPS 1/8 through 72
- Outlet size
- up to 60 inches
- Classes
- STD, XS, XXS, S160, 3000, 6000, 9000, 5S, 10S
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The Vesselet suits locations where a conventional branch connection cannot meet the requirements for weld inspection and fatigue strength. Its design permits complete radiographic or ultrasonic examination of the weld, a longer service life under cyclic loading, and a reduced stress intensification factor (SIF). The fitting is designed and qualified by the Markl fatigue method, burst testing, finite element analysis and many years of field service.
The fitting is welded into the run pipe with a full butt weld, so the joint area remains accessible to volumetric inspection. Outlet connections come as butt-welded, socket-welded, NPT-threaded or flanged ends. The standard covers run sizes from NPS 1/8 through 72, outlets can be made up to 60 inches, and manufacture is possible in more than 60 different alloys.
Available pressure and wall thickness classes are STD, XS, XXS, S160, 3000, 6000, 9000, 5S and 10S. Design follows MSS SP-97, ASME B31.1, ASME B31.3 and ASME Section III, while testing and inspection follow MSS SP-97 and marking follows MSS SP-25. End preparation is covered by MSS SP-97 for the face to pipe, ASME B16.11 for socket welding, ASME B1.20.1 for NPT threads and ASME B16.25 for butt weld bevels.
Ordering to any code requires the run pipe dimensions and wall thickness, plus the outlet dimensions, material and quantity. For the B31.1 and B31.3 codes and for ASME III, the fitting is qualified by burst testing. ASME VIII, ASME Section I, B31.4 and B31.8 do not accept qualification by a test series alone and require area compensation, so the design code, design temperature, design pressure and corrosion allowance, where applicable, should also be specified.
Main sectors are oil and gas, power generation, chemicals, refining, petrochemicals and general industrial piping. Sizes for a particular combination of run pipe and outlet are determined from the manufacturer's catalogue.
Technical specifications
| Type | integrally reinforced insert branch fitting |
|---|---|
| Sizes | NPS 1/8 through 72 |
| Outlet size | up to 60 inches |
| Classes | STD, XS, XXS, S160, 3000, 6000, 9000, 5S, 10S |
| Materials | over 60 alloys |
| Outlet ends | butt-welded, socket-welded, NPT-threaded, flanged |
| Design | MSS SP-97, ASME B31.1, ASME B31.3, ASME Section III |
| Inspection and testing | MSS SP-97 |
| Marking | MSS SP-25 |
| Face to pipe | MSS SP-97 |
| Socket weld | ASME B16.11 |
| NPT threads | ASME B1.20.1 |
| Butt weld bevels | ASME B16.25 |
Request a price and lead time
Vesselet Integrally Reinforced Insert Branch Fitting, Outlet up to 60 Inches. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
When should the Vesselet be chosen over a conventional branch connection?
When full radiographic or ultrasonic weld inspection and longer service life under cyclic loading are required, since the fitting is butt welded into the run pipe.
What data is needed to place an order?
The run pipe and outlet size and schedule, material and quantity. For ASME VIII, ASME Section I, B31.4 and B31.8 also the design code, temperature, pressure and corrosion allowance.
Which outlet ends are available?
Ends can be butt-welded, socket-welded, threaded to NPT or flanged, with outlets up to 60 inches.
Similar equipment from other manufacturers






