1 1/2″ HL-11-T GATE LE forged gate valve, Class 800, NPT threaded ends, bolted bonnet, full bore
1 1/2″ HL-11-T GATE LE is a forged gate valve with a bolted bonnet and an OS&Y rising stem, full bore, Class 800, and NPT threaded ends to ASME B1.20.1. The body and bonnet are carbon steel A 105, the wedge is A182 F6a, and the seats are hard-faced ASTM A479 410 HF.
- Type
- Forged steel gate valve, bolted bonnet, OS&Y, full bore
- Size
- 1 1/2″
- Pressure class
- 800
- Working pressure
- 1975 psi at 100 ºF
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The HL-11-T GATE LE gate valve in 1 1/2″ size is intended for shut-off duty on small-bore pipework in oil and gas, power generation, chemical plants, refineries, petrochemical sites and general industrial piping. Its threaded ends suit lines where on-site welding is unwanted or not allowed, and where small valves need quick replacement. The valve works only in the fully open or fully closed position, so it should not be used to regulate flow.
The forged body and bolted bonnet conform to API 602, ASME B16.34 and BS 5352. The bonnet joint uses a spiral-wound 316L gasket with graphite filler, secured by A193 B7 studs. The rising stem, with an outside screw and yoke (OS&Y) arrangement, has backseat protection that isolates the gland from the process fluid when the valve is fully open. The two-part self-aligning gland takes graphite packing, and its flange is drawn down with A193 B6 studs and A194 2H nuts.
Carbon steel A 105 (A105N) forms the body and bonnet, and the trim is F6/HF, numbered 8 under API. The wedge is A182 F6a, the stem ASTM A479 410, and the seat rings ASTM A479 410 with hard-facing. The yoke bushing is AISI 416 and the handwheel is A105. The valve is rated at 1975 psig at 100°F, which is 138 bar at 38°C, with a Cv of 92 and a weight of 16 lb. Every valve is tested to API 598 and marked to MSS SP25.
Threads follow ASME B1.20.1 and should be sealed with a compound suited to the process medium before fitting. The construction length is 7.09 in (180 mm). Bonnet bolts take 70 ft-lbs of torque and the gland nut 8.6 ft-lbs, and these values apply during maintenance and whenever the gland is retightened in service. The valve belongs to the Class 800 and Class 1500 range of bolted-bonnet gate valves in full and standard port.
Technical specifications
| Type | Forged steel gate valve, bolted bonnet, OS&Y, full bore |
|---|---|
| Size | 1 1/2″ |
| Pressure class | 800 |
| Working pressure | 1975 psi at 100 ºF |
| Connection | NPT thread (ASME B1.20.1) |
| Body and bonnet | A 105, trim F6/HF |
| Trim number (API) | 8 |
| Seats | ASTM A479 410 HF |
| Stem | ASTM A479 410 |
| Wedge | ASTM A182 F6a |
| Sealing | Graphite packing, spiral-wound 316L gasket with graphite filler |
| Cv | 92 |
| Weight | 16 lb |
| Dimensions A / B / C | 7.09 in / 11.42 in / 5.43 in |
| Dimensions F / G | 1.38 in / 3.07 in |
| Bonnet bolt torque | 70 ft-lbs |
| Gland nut torque | 8.6 ft-lbs |
| Standards | API 602, ASME B16.34, BS 5352, API 598, MSS SP25 |
Part numbers
Show all part numbers (1)
1 1/2″ HL-11-T GATE LE
Request a price and lead time
1 1/2″ HL-11-T GATE LE forged gate valve, Class 800, NPT threaded ends, bolted bonnet, full bore. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What is the pressure rating of the 1 1/2″ HL-11-T GATE LE valve?
For carbon steel at Class 800 the rating is 1975 psig at 100°F, which is 138 bar at 38°C.
Which materials come into contact with the process fluid?
The body and bonnet are A 105, the wedge A182 F6a, the stem ASTM A479 410, and the seat rings ASTM A479 410 with hard-facing.
What testing does the valve undergo?
Each valve is tested to API 598, and its design conforms to API 602, ASME B16.34 and BS 5352.
Similar equipment from other manufacturers






