International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

1″ HL-11-T GATE LE forged gate valve, Class 800, NPT threaded ends, bolted bonnet, full bore

1″ HL-11-T GATE LE is a forged gate valve with a bolted bonnet and an OS&Y rising stem, full bore, Class 800, and NPT threaded ends to ASME B1.20.1. The body and bonnet are carbon steel A 105, the wedge is A182 F6a, and the seats are hard-faced ASTM A479 410 HF.

Type
Forged gate valve, bolted bonnet, OS&Y, full bore
Size
1″
Pressure class
800
Working pressure
1975 psi at 100 ºF

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The 1-inch HL-11-T GATE LE is a gate valve for isolating flow on small-diameter lines in oil and gas, power generation, chemical and petrochemical plants, refineries and general industrial piping. NPT threaded ends make installation possible where welding is impractical or forbidden, and allow quick replacement on small lines. It is intended for fully open or fully closed service only, not for flow regulation.

The valve is built to API 602, ASME B16.34 and BS 5352 with a forged body, bolted bonnet, and rising OS&Y stem in a full-bore passage. The bonnet is sealed by a 316L spiral-wound gasket with graphite, fixed with A193 B7 studs. Packing is graphite, held by a two-part self-centring gland whose flange uses A193 B6 studs and A194 2H nuts. Backseat protection shields the gland from the medium when the valve is fully open.

Body and bonnet are carbon steel A 105 (A105N) with F6/HF trim, API trim number 8. The wedge is A182 F6a, the stem ASTM A479 410, and the seat rings are ASTM A479 410 HF with hard-facing. The yoke bushing is AISI 416, and the handwheel is A105. The rating is 1975 psig at 100°F, which equals 138 bar at 38°C. Cv is 32, and the valve weighs 7.75 lb. Each unit is tested to API 598 and marked per MSS SP25.

Threads follow ASME B1.20.1 and should be sealed with a compound appropriate to the medium. Construction length is 5.00 in (127 mm). Bonnet bolts are tightened to 50 ft-lbs and the gland nut to 3.2 ft-lbs, and these values apply during servicing and whenever the gland is re-tightened in service. The size belongs to the Class 800 and Class 1500 range of full and standard port bolted-bonnet gate valves.

Technical specifications

TypeForged gate valve, bolted bonnet, OS&Y, full bore
Size1″
Pressure class800
Working pressure1975 psi at 100 ºF
ConnectionNPT thread (ASME B1.20.1)
Body and bonnetA 105, trim F6/HF
Trim number (API)8
SeatsASTM A479 410 HF, hard-faced
StemASTM A479 410
WedgeASTM A182 F6a
SealingGraphite packing, spiral-wound 316L gasket with graphite filler
Cv32
Weight7.75 lb
Dimensions A / B / C5.00 in / 8.86 in / 3.82 in
Dimensions F / G0.89 in / 2.20 in
Bonnet bolt torque50 ft-lbs
Gland nut torque3.2 ft-lbs
StandardsAPI 602, ASME B16.34, BS 5352, API 598, MSS SP25

Part numbers

Show all part numbers (1)

1″ HL-11-T GATE LE

Request a price and lead time

1″ HL-11-T GATE LE forged gate valve, Class 800, NPT threaded ends, bolted bonnet, full bore. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What pressure rating applies to the 1″ HL-11-T GATE LE?

Carbon steel at Class 800 is rated at 1975 psig at 100°F, which is 138 bar at 38°C.

Which materials contact the process fluid?

A 105 for the body and bonnet, A182 F6a for the wedge, ASTM A479 410 for the stem, and ASTM A479 410 with hard-facing for the seats.

What testing is carried out?

Each valve is tested to API 598, and its design conforms to API 602, ASME B16.34 and BS 5352.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides