International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

1 1/2″ HL-11-SW GATE LE forged gate valve, Class 800, socket weld ends, bolted bonnet, full bore

1 1/2″ HL-11-SW GATE LE is a forged gate valve with a bolted bonnet and an OS&Y rising stem, full bore, Class 800, and socket weld ends to ASME B16.11. The body and bonnet are carbon steel A 105, the wedge is A182 F6a, and the seats are ASTM A479 410 HF with hard-facing.

Type
Forged gate valve, bolted bonnet, OS&Y, full bore
Size
1 1/2″
Pressure class
800
Working pressure
1975 psi at 100 ºF

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The HL-11-SW GATE LE valve in 1 1/2″ size is made for shut-off duty on small-bore pipework in oil and gas, power generation, chemical plants, refineries, petrochemical sites and general industrial piping. Its socket weld ends suit permanent, high-pressure joints on small lines where a leak-tight connection without threads is needed. The valve works only fully open or fully closed and should not be used to throttle flow.

Design follows API 602, ASME B16.34 and BS 5352 for a forged body with a bolted bonnet. The bonnet relies on a spiral-wound 316L gasket filled with graphite, held down by A193 B7 studs. The rising stem has an outside screw and yoke (OS&Y) and a backseat that shuts the gland off from the process fluid when the valve is fully open. The two-part self-aligning gland takes graphite packing, and its flange is drawn down with A193 B6 studs and A194 2H nuts.

Carbon steel A 105 (A105N) is used for the body and bonnet, with F6/HF trim numbered 8 under API. Inside the valve, the wedge is A182 F6a, the stem ASTM A479 410, and the seat rings ASTM A479 410 with hard-facing. An AISI 416 yoke bushing and an A105 handwheel complete the materials list. The rating is 1975 psig at 100°F, equal to 138 bar at 38°C, with a Cv of 92 and a weight of 16 lb. Each valve is tested to API 598 and marked to MSS SP25.

Socket ends are made to ASME B16.11: the pipe is inserted into the socket and fillet welded. The construction length is 7.09 in (180 mm). Bonnet bolts take 70 ft-lbs of torque and the gland nut 8.6 ft-lbs, and these figures apply during servicing and whenever the gland is adjusted in operation. This size belongs to the Class 800 and Class 1500 series of bolted-bonnet gate valves in full and standard port.

Technical specifications

TypeForged gate valve, bolted bonnet, OS&Y, full bore
Size1 1/2″
Pressure class800
Working pressure1975 psi at 100 ºF
ConnectionSocket weld (ASME B16.11)
Body and bonnetA 105, trim F6/HF
Trim number (API)8
SeatsASTM A479 410 HF, hard-faced
StemASTM A479 410
WedgeASTM A182 F6a
SealingGraphite packing, spiral-wound 316L gasket with graphite filler
Cv92
Weight16 lb
Dimensions A / B / C7.09 in / 11.42 in / 5.43 in
Dimensions F / G1.38 in / 3.07 in
Bonnet bolt torque70 ft-lbs
Gland nut torque8.6 ft-lbs
StandardsAPI 602, ASME B16.34, BS 5352, API 598, MSS SP25

Part numbers

Show all part numbers (1)

1 1/2″ HL-11-SW GATE LE

Request a price and lead time

1 1/2″ HL-11-SW GATE LE forged gate valve, Class 800, socket weld ends, bolted bonnet, full bore. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What pressure can the 1 1/2″ HL-11-SW GATE LE handle?

For carbon steel at Class 800 the rating is 1975 psig at 100°F, equal to 138 bar at 38°C.

What materials are wetted by the process fluid?

The body and bonnet are A 105, the wedge A182 F6a, the stem ASTM A479 410, and the seat rings ASTM A479 410 with hard-facing.

How is the valve tested?

It is tested to API 598, and its design conforms to API 602, ASME B16.34 and BS 5352.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides