International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Series M4 Metal Seated Ball Valve for Steam up to 593 °C, Class 1700 to 4500

The Series M4 is a metal seated ball valve for zero leakage shut off of high pressure, high temperature steam on drains and vents at power stations. Its forged one piece body is rated for classes 1700, 3100 and 4500 and runs up to 593 °C.

Type
Metal seated ball valve, isolation
Sizes
NPS 1/2 to 2 1/2 (DN 15 to 65) SW or BW; NPS 3 to 4 (DN 80 to 100) BW
Pressure class
ASME 1700, 3100, 4500
Maximum temperature
593 °C (1100 °F)

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

M4 valves are installed on drain, purge and isolation lines for steam, superheated steam, water and other clean media at high pressure and temperature. Typical positions include boiler drains, feedwater drains, header and turbine drains, drains either side of the main steam stop valve seat, superheater and steam drum vents, sootblower isolation and bypass lines. Users include coal and combined cycle power stations, cogeneration plants and balance of plant at nuclear sites.

The body is a one piece forging with no body joint, so there is no path for leakage to the outside. Ball and seat use the same material and coating, so they expand together through thermal cycles and keep their tightness. The ball is lapped to the seat over the full 360 degree sphere, and wide sealing faces lower the load during cycling. A Belleville spring made from alloy 718 keeps the ball pressed onto the seat across the full temperature range, and a stack of these springs preloads the stem packing. The high strength stem has an upper bearing ring that prevents it from being blown out.

Body material options are A105, A182-F22 Cl.3, A182-F91 or A182-F92. Ball and seat are made from 410 stainless steel with HVOF chromium carbide coating, or from alloy 718 with HVOF or fused chromium carbide coating. Stainless 410 is not recommended above 454 °C, so higher temperatures call for the coated alloy 718. The stem is either 431 stainless steel with QPQ treatment or alloy 718.

Sizes NPS 1/2 to 2 1/2 (DN 15 to 65) are supplied with socket weld or butt weld ends in the Limited class, and NPS 3 to 4 (DN 80 to 100) with butt weld ends in the Standard class. The bore is full or reduced to ASME TDP-1, and flanged or special ends are available to order. An external groove on the body takes heat away during post weld heat treatment after installation. The valve is designed to ASME B16.34, with ends to ASME B16.11 and ASME B16.25, and is tested to API 598 and MSS SP 61. An ISO 5211 mounting flange allows a high temperature actuator to be fitted directly. The valve conforms to PED 2014/68/EU and CRN, and storage is recommended between 4 and 29 °C with humidity no higher than 75%.

Technical specifications

TypeMetal seated ball valve, isolation
SizesNPS 1/2 to 2 1/2 (DN 15 to 65) SW or BW; NPS 3 to 4 (DN 80 to 100) BW
Pressure classASME 1700, 3100, 4500
Maximum temperature593 °C (1100 °F)
Shut offZero leakage
Body constructionForged in one piece, no body joint
Body materialA105, A182-F22 Cl.3, A182-F91/F92
Ball and seat410 SS with HVOF chromium carbide; alloy 718 with HVOF or fused chromium carbide
Stem431 SS with QPQ treatment; alloy 718
BoreFull or reduced, ASME TDP-1
EndsSW to ASME B16.11, BW to ASME B16.25, flanged and special
DesignASME B16.34
TestingAPI 598, MSS SP 61
Actuator mountingISO 5211
CompliancePED 2014/68/EU, CRN

Part numbers

Show all part numbers (1)

Series M4

Request a price and lead time

Series M4 Metal Seated Ball Valve for Steam up to 593 °C, Class 1700 to 4500. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Which ball and seat materials are used above 454 °C?

Stainless 410 is not recommended above 454 °C, so alloy 718 with an HVOF or fused chromium carbide coating is used for higher temperatures. The valve is rated to 593 °C at its maximum.

Which pressure classes are available?

Classes ASME 1700, 3100 and 4500 are offered. Sizes NPS 1/2 to 2 1/2 are supplied in the Limited class, and NPS 3 to 4 in the Standard class.

Can an actuator be fitted directly?

Yes, the valve has an ISO 5211 mounting flange, so a high temperature actuator can be fitted directly, or a standard actuator can be fitted through an adaptor.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides