
Series 98C Compact Scotch Yoke Pneumatic Actuator for Quarter-Turn Valves, up to 2000 N·m
The Series 98C is a compact quarter-turn scotch yoke actuator for ball and butterfly valves. It delivers torque up to 2000 N·m, in double acting or spring return form, with an operating pressure of 2.8–10.3 bar.
- Type
- compact pneumatic scotch yoke actuator, quarter-turn
- Configuration
- double acting (DA), spring return (SR)
- Output torque
- up to 2000 N·m
- Spring end torque
- up to 715 N·m
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The 98C actuators operate ball valves and butterfly valves with quarter-turn movement for open/close, regulation, emergency shut-off and purging. The torque range covers valves of nominal sizes from 2 to 20 inches. Typical sectors are industrial gases, chemicals and petrochemicals, food production and other processes that use pneumatically operated valves.
The scotch yoke mechanism converts piston travel into shaft rotation. The central body is not pressurised: air goes only into the cylinder and does not fill the body cavity. This reduces air consumption and the number of seals, and with them the possible leak paths. The actuator has been tested to one million cycles. The standard coating is an epoxy and polyurethane system.
Two configurations are available: double acting (DA) with one cylinder, and spring return (SR), which fails close (CW) or fails open (CCW) when air is lost. Torque reaches 2000 N·m, and the spring end torque reaches 715 N·m. The fail-safe direction is changed in the field: the actuator is turned around and refitted to the valve. As well as pneumatic operation, the actuator can be powered by hydraulics or an electro-hydraulic unit.
The operating medium is dry compressed air, inert gas or natural gas, at 40 to 150 psi (2.8 to 10.3 bar). Air should meet ISO 8573-1 class 2:3:4, filtered to 5 micrometres, with a pressure dew point of -20 °C or at least 10 °C below ambient temperature. The standard temperature range is -29 to 93 °C, the low-temperature version goes down to -46 to 60 °C, and the high-temperature version reaches 149 °C.
The housing is rated IP66, IP67M and IP68 under IEC 60529, and is tested to EN 15714-3. The actuators suit SIL 3 under IEC 61508 and IEC 61511, carry ATEX and PED approvals, and are available to API 6DX on request. Two ISO 5211 mounting faces and a square output shaft allow fitting to any quarter-turn valve. The VDI/VDE 3845 (NAMUR) pad takes limit switches, sensors and positioners. Maintenance comes down to replacing soft sealing parts.
Technical specifications
| Type | compact pneumatic scotch yoke actuator, quarter-turn |
|---|---|
| Configuration | double acting (DA), spring return (SR) |
| Output torque | up to 2000 N·m |
| Spring end torque | up to 715 N·m |
| Working pressure | 40–150 psi (2.8–10.3 bar) |
| Working medium | dry compressed air, inert gas, natural gas |
| Air quality | ISO 8573-1 class 2:3:4, filtration 5 micrometres |
| Temperature, standard | -29 to 93 °C |
| Temperature, low-temperature version | -46 to 60 °C |
| Temperature, high-temperature version | up to 149 °C |
| Ingress protection | IP66, IP67M, IP68 per IEC 60529 |
| Valve mounting | ISO 5211 |
| Accessory mounting | VDI/VDE 3845 (NAMUR) |
| Testing | EN 15714-3 |
| Certification | ATEX, PED, SIL 3; API 6DX on request |
| Valves | ball valves, butterfly valves |
Part numbers
Show all part numbers (18)
25E1-80, 25E1-100, 25E1-125, 25E1-140, 50E1-100, 50E1-125, 50E1-140, 50E1-160, 10E2-125, 10E2-140, 10E2-160, 10E2-180, 10E2-200, 20E2-140, 20E2-160, 20E2-180, 20E2-200, 20E2-220
Request a price and lead time
Series 98C Compact Scotch Yoke Pneumatic Actuator for Quarter-Turn Valves, up to 2000 N·m. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
How is the fail-safe direction changed on the 98C?
The actuator is removed, turned around and refitted to the valve. No separate parts are needed for this.
What air supply is needed?
Dry compressed air to ISO 8573-1 class 2:3:4, filtered to 5 micrometres, at 2.8–10.3 bar. Inert or natural gas is also permitted.
Is the actuator suitable for safety systems?
Yes, the series is suitable for SIL 3 under IEC 61508 and IEC 61511 and is used for emergency shut-off.
Similar equipment from other manufacturers






