
Series 942 knife gate valve with vortex breaker for recycle and waste, DN 100-300
The Series 942 is a one-way knife gate valve with a one-piece cast lug body and a replaceable vortex breaker. It is intended for shut-off duty on recycle and waste lines in pulp and paper plants, where cycling is frequent and solid inclusions are present.
- Type
- one-way knife gate valve with vortex breaker
- Sizes
- NPS 4 to 12 / DN 100 to 300
- Pressure
- 150 psi (10 bar)
- Temperature range
- -40…200 °C
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Valves in this series open and close on the recycle and waste sections of pulp and paper mills, including knotters, waste lines, hydrapulpers, screening units, cyclone separators, high consistency cleaners and reject traps. In these lines the stock carries staples, wire, nails, sand, strips and plastic, and the valve cycles often and must cut through the flow when it closes.
A feature of the series is a replaceable vortex breaker made from high-chrome alloy with a hardness of 500 HB. It breaks up the swirling flow that would otherwise wear the blade and body prematurely. The body is a one-piece cast CF8M (316) stainless steel lug design with no stagnant cavities, and it drains itself, so it can be installed in any position. The seat is metal and integral with the body. The blade, made from 17-4PH H-1025 stainless after heat treatment, has a rounded edge and resists abrasion, while a support ring keeps it concentric during horizontal installation.
The stem seal has four layers with a copper scraper at the bottom, the seal chamber is machined, and the gland bush is spring loaded. Fasteners in B8M stainless steel and a PTFE damper stabilise the blade and absorb vibration. The pneumatic cylinder is rated for frequent cycles and for cutting heavy media, and it has double piston rod seals.
The valves cover NPS 4 to 12 (DN 100-300) and are rated to 150 psi (10 bar). The operating range in the technical manual is -40 to 200 °C, while the product literature allows up to 250 °C for the seat and seal. The recommended actuator air pressure is 50-100 psi (3.5-7 bar), with a maximum of 100 psi. The design follows MSS SP-81 for both construction and face-to-face length, and the flange drilling follows ASME B16.5 CL150. The valves carry CE/PED and CRN approvals.
The vortex breaker is a wear part and can be replaced without changing the body.
Technical specifications
| Type | one-way knife gate valve with vortex breaker |
|---|---|
| Sizes | NPS 4 to 12 / DN 100 to 300 |
| Pressure | 150 psi (10 bar) |
| Temperature range | -40…200 °C |
| Max. temperature of seat and seal | up to 250 °C |
| Body | one-piece, lug, CF8M (316) |
| Blade | 17-4PH H-1025 |
| Seat | metal, Hi-Chrome |
| Vortex breaker | Hi-Chrome, 500 HB, replaceable |
| Stem seal | four layers with copper scraper |
| Actuator | pneumatic |
| Actuator air pressure | 50-100 psi (3.5-7 bar) |
| Construction, face-to-face length | MSS SP-81 |
| Flange drilling | ASME B16.5 CL150 |
| Certification | CE/PED, CRN |
Part numbers
Show all part numbers (1)
S942-0400-10-A02C691-B0294-C0240
Request a price and lead time
Series 942 knife gate valve with vortex breaker for recycle and waste, DN 100-300. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Why does the Series 942 have a vortex breaker?
It breaks up the swirling flow carrying solid inclusions, which would otherwise wear the blade and body. The 500 HB high-chrome part is replaceable.
Which sizes and pressure does the series cover?
From NPS 4 to 12 (DN 100 to 300), with a working pressure up to 150 psi (10 bar) and ASME B16.5 CL150 flange drilling.
Can the valve be installed horizontally?
Yes. The lug body allows any position, and a support ring keeps the blade concentric during horizontal installation.
Similar equipment from other manufacturers






