International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Series 941 unidirectional knife gate valve, DN 50 to 600, up to 10 bar

The 941 is a unidirectional knife gate valve with a one-piece lug body for on/off shut-off. The seat is integral metal, with an optional replaceable soft seat giving zero leakage. Sizes run from DN 50 to 600 with pressures up to 10 bar (150 psi).

Type
unidirectional knife gate valve
Sizes
DN 50-600 (NPS 2-24)
Maximum working pressure
10 bar (150 psi)
Body design
one-piece, lug

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Series 941 is used to isolate clean, dirty, corrosive, abrasive, viscous and hot media. Typical positions are pulp, alkali and process waste in pulp and paper; pneumatic conveying, raw and treated water, hydraulic transport of solids, cement and hot gases; fly ash and slag in power generation; sludge lines at treatment works; pellets, process liquids and petroleum products in chemicals; wineries, dairies, breweries and grain silos; and mining of lithium, cobalt and other soft ores.

The universal top works can be converted from manual to pneumatic operation without replacing the valve. Hand-operated valves have a grease fitting. A yoke clevis and horizontal bolted fixing hold the gate steady, while guides keep it coaxial over the full stroke. Rounded gate edges extend packing life. The body has no dead pockets and drains itself, and the lug body allows any mounting position, including dead-end pipework. A cast yoke takes the loads from different actuators.

Stem sealing uses packing with a spring-loaded quad seal ring and an anti-extrusion PTFE ring. Packing options are pure PTFE up to 260 °C, synthetic fibre with PTFE, PTFE with a Buna-N ring up to 90 °C, with Viton up to 200 °C, with EPDM up to 120 °C, and graphite up to 650 °C. Replaceable seats are Buna-N from -36 to 90 °C, EPDM from -54 to 120 °C, Viton from -26 to 200 °C, and PTFE with a Viton backing ring up to 260 °C.

Body materials are WCB carbon steel, stainless steels CF8, CF8M and CF3M, and duplex SAF 2205 and SAF 2507. The gate is made from stainless steels 304, 316 and 317, duplex SAF 2507, 17-4PH, Hastelloy C and Monel, or titanium. Operators include handwheel, bevel gearbox, lever, and pneumatic, hydraulic or electric actuators.

Face-to-face dimensions and construction follow MSS SP-81, and flange drilling is to ASME B16.5 CL150. Body and seat testing is per MSS SP-151, and every valve passes a factory cycle test and has a design conformity certificate. Certificates include ATEX, CRN, PED, PE(S)R, TR CU and UA TR. Options include gate protective covers, open/closed interlocks, limit switches, solenoid valves and fail-safe position systems. For abrasive media in normally open service, a chromium iron (25% Cr) or polyurethane baffle cone is fitted between the valve and flange.

Technical specifications

Typeunidirectional knife gate valve
SizesDN 50-600 (NPS 2-24)
Maximum working pressure10 bar (150 psi)
Body designone-piece, lug
Body materialsWCB, CF8, CF8M, CF3M, SAF 2205, SAF 2507
Gate materials304, 316, 317, SAF 2507, 17-4PH, Hastelloy C, Monel, titanium
Seatintegral metal; optional replaceable soft
Packingquad seal with PTFE anti-extrusion ring
Design standardMSS SP-81
Face-to-faceMSS SP-81
Testing standardMSS SP-151
Flange drillingASME B16.5 CL150
CertificatesATEX, CRN, PED, PE(S)R, TR CU, UA TR
Operatorshandwheel, bevel gearbox, lever, pneumatic, hydraulic, electric

Request a price and lead time

Series 941 unidirectional knife gate valve, DN 50 to 600, up to 10 bar. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Can the 941 be fitted on a dead-end line?

Yes. The lug body allows any mounting position, including dead-end service.

Which seats are available for the 941?

The standard seat is integral metal. Optional replaceable soft seats in Buna-N, EPDM, Viton or PTFE with a Viton backing ring give zero leakage.

Can a manual valve be converted to pneumatic operation?

Yes. The universal top works can be changed from manual to pneumatic operation quickly.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides