International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Series 752/752HP Bidirectional Knife Gate Valve for Slurries, DN 50–600, 16 and 20 bar

Series 752 and 752HP knife gate valves shut off abrasive and corrosive slurries, sludges and process water in both flow directions with zero leakage. The two-part bolted wafer body has a steel-reinforced perimeter seat, and sizes run from NPS 2 to 24 (DN 50 to 600).

Sizes
NPS 2–24 (DN 50–600)
Pressure 752
232 psi (16 bar)
Pressure 752HP
290 psi (20 bar)
Body type
two-part bolted, wafer

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The two-part bolted body is a wafer design that fits between flanges. The replaceable moulded seat runs around the full perimeter, is reinforced with steel and is clamped between the body halves, so the valve shuts off in both directions without leakage. The knife is built to resist deflection, which keeps it concentric. Where abrasive media are handled, liners of polyurethane or high-chrome iron protect the body along the whole bore. For dead-end service the valve is fitted with a ring flange on the outlet side.

The Series 752 is rated for 232 psi (16 bar), has a cast two-part yoke, a face-to-face length to MSS SP-81 and a manufacturer's standard design. The Series 752HP is rated for 290 psi (20 bar), conforms to MSS SP-135 and ASME B16.34, and has a reinforced steel yoke, a bellows stem seal as standard and anti-friction thermoplastic knife guides.

Body options are WCB carbon steel and CF8, CF3 and CF3M stainless steel, plus duplex CE3MN and CD3MN. Knives are available in 304, 316, 317, 17-4PH, duplex SAF 2507 and SAF 2205, Hastelloy C, Monel and Alloy 20. The stem is 304 stainless steel. The seat material sets the temperature range: Buna-N from -37 to 90 °C, EPDM from -54 to 120 °C and Viton from -26 to 200 °C. The synthetic-fibre PTFE stem packing is rated to 232 °C.

Flanges are drilled to ASME B16.5 CL150, the valve is tested to MSS SP-151, and it holds Canadian CRN registration. Operators include handwheel, bevel gearbox, pneumatic, hydraulic or electric actuation. Pneumatic actuators take up to 100 psi (7 bar) of air, with 80 to 100 psi recommended. The gasket between valve and flange should be no thicker than 1/8 inch (3.2 mm).

The valves serve slurry and process pipelines in mining, power, chemicals and petrochemicals, pulp and paper, food and sugar, water treatment and effluent. Media include abrasive and corrosive slurries, sludges, and process and raw water. The full-bore design does not restrict flow and gives a low pressure drop.

Technical specifications

SizesNPS 2–24 (DN 50–600)
Pressure 752232 psi (16 bar)
Pressure 752HP290 psi (20 bar)
Body typetwo-part bolted, wafer
Body materialsWCB, CF8, CF3, CF3M, CE3MN, CD3MN
Knife materials304, 316, 317, 17-4PH, SAF 2507, SAF 2205, Hastelloy C, Monel, Alloy 20
Stem304 stainless steel
Buna-N seat-37…90 °C
EPDM seat-54…120 °C
Viton seat-26…200 °C
Stem sealPTFE fibre to 232 °C; PTFE with EPDM to 90 °C; PTFE with Viton to 200 °C
Tightnesszero leakage in both directions
Design 752 / 752HPmanufacturer's standard / MSS SP-135
Face to face 752 / 752HPMSS SP-81 / MSS SP-135
FlangesASME B16.5 CL150
TestingMSS SP-151
Actuatorshandwheel, bevel gearbox, pneumatic, hydraulic, electric
Pneumatic air pressureup to 100 psi (7 bar), 80–100 psi recommended

Part numbers

Show all part numbers (2)

752, 752HP

Request a price and lead time

Series 752/752HP Bidirectional Knife Gate Valve for Slurries, DN 50–600, 16 and 20 bar. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

How does the Series 752HP differ from the 752?

The 752HP is rated for 20 bar instead of 16 bar, is built to MSS SP-135, and has a steel-reinforced yoke, a bellows stem seal and thermoplastic knife guides.

Can the valve be installed at the end of a line?

Yes, for dead-end service the valve is fitted with a ring flange on the downstream side.

What protection is available for abrasive slurries?

Polyurethane or high-chrome iron liners along the full bore, together with a steel-reinforced replaceable seat.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides