International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Series 746HP Knife Gate Valve with Polyurethane Lining, DN 50 to 900, Bidirectional

The 746HP series comprises bidirectional knife gate valves with a one-piece moulded polyurethane lining over the body and chamber. The valves give a tight shut-off without leakage on abrasive pulps and slurries from DN 50 to 900.

Type
bidirectional knife gate valve with polyurethane lining
Sizes
NPS 2 to 36 (DN 50 to 900)
Pressure, 316 blade
10 bar (NPS 2 to 28), 7 bar (NPS 30 to 36)
Pressure, 2205 / 17-4PH blade
16 bar (NPS 2 to 24), 10 bar (NPS 28 to 30), 7 bar (NPS 32 to 36)

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The 746HP valves are installed on pipelines carrying abrasive media in mining, water treatment, power generation, chemicals and petrochemicals. The polyurethane lining is moulded across the whole body and chamber of the valve and extends onto the front end face of the body. It fully protects the body from the abrasive medium, and no additional gaskets are needed on the flanges.

The body is a single-piece, high-strength cast iron wafer-style design fitted between flanges, which keeps it compact and simplifies transport and installation. The bore is full with no restriction, so pressure losses are minimal. Seat and bore are flush, leaving no cavities where medium could collect and prevent full closure, so purging is not required. The sharp-edged blade cuts through dense pulps and hard inclusions.

Blade material is selected for the medium: stainless steels 304, 316 and 317, duplex SAF 2205 and SAF 2507, 17-4PH, Hastelloy C, Monel and titanium. The stem in 304 or 316 stainless steel is enclosed by upper and lower protective covers. The stem seal is multi-layer, made of square-section synthetic fibre impregnated with PTFE, with a spring-loaded quad seal ring, and the packing can be replaced in place.

Permissible working pressure depends on the blade size and material. With a 316 stainless steel blade it is up to 10 bar for NPS 2 to 28 and 7 bar for NPS 30 to 36. With a 2205 duplex or 17-4PH blade it is up to 16 bar for NPS 2 to 24, 10 bar for NPS 28 to 30 and 7 bar for NPS 32 to 36. The polyurethane lining works from -29 to 90 °C, and the packing up to 200 °C.

Actuation is by handwheel, bevel gearbox, lever, pneumatic, hydraulic or electric actuator. Double-acting or spring-return pneumatic cylinders run on air at 3 to 7 bar. Testing follows MSS SP-151, face-to-face length follows MSS SP-81, and flange drilling follows ASME B16.5 CL150, AS Table D and E, DIN 10 and 16, and SANS T1000/3 and T1600/3. Blade travel ranges from 50 mm for NPS 2 to 850 mm for NPS 36. Handwheel versions need no regular maintenance, and lubrication is through grease nipples.

Technical specifications

Typebidirectional knife gate valve with polyurethane lining
SizesNPS 2 to 36 (DN 50 to 900)
Pressure, 316 blade10 bar (NPS 2 to 28), 7 bar (NPS 30 to 36)
Pressure, 2205 / 17-4PH blade16 bar (NPS 2 to 24), 10 bar (NPS 28 to 30), 7 bar (NPS 32 to 36)
Bodysingle-piece, wafer-style, high-strength cast iron
Liningpolyurethane, -29 to 90 °C
Packingsynthetic fibre with PTFE and quad seal, up to 200 °C
Stem304, 316 stainless steel
Blade materials304, 316, 317, SAF 2507, SAF 2205, 17-4PH, Hastelloy C, Monel, titanium
Actuatorshandwheel, bevel gearbox, lever, pneumatic, hydraulic, electric
Air supply for pneumatic actuator3 to 7 bar
Blade travel50 mm (NPS 2) to 850 mm (NPS 36)
TestingMSS SP-151
Face-to-face lengthMSS SP-81
Flange drillingASME B16.5 CL150, AS Table D and E, DIN 10 and 16, SANS T1000/3, SANS T1600/3

Part numbers

Show all part numbers (1)

746HP

Request a price and lead time

Series 746HP Knife Gate Valve with Polyurethane Lining, DN 50 to 900, Bidirectional. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Are flange gaskets needed with the 746HP valve?

No, the polyurethane lining runs onto the front end face of the body and acts as the seal, so no additional gaskets are needed.

What is the maximum pressure of the valve?

Up to 16 bar with a 2205 duplex or 17-4PH blade for NPS 2 to 24; with a 316 stainless steel blade up to 10 bar for NPS 2 to 28.

What temperature range is permitted for the medium?

The polyurethane lining is rated for a range from -29 to 90 °C.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides