International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Series 740 Bidirectional Knife Gate Valve, DN 50–900, Lug Body, up to 10 bar

The Series 740 knife gate valve has a one-piece cast lug body and shuts off flow in both directions with zero leakage. It is available from NPS 2 to 36 (DN 50–900), with a pressure rating of up to 150 psi (10 bar) for DN 50–600 and 100 psi (7 bar) for DN 750–900.

Type
bidirectional knife gate valve, full bore
Sizes
NPS 2–36 / DN 50–900
Maximum working pressure
DN 50–600: 150 psi / 10 bar; DN 750–900: 100 psi / 7 bar
Body
one-piece cast, lug

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Valves of this type open and close lines and isolate clean, dirty, corrosive and viscous media. Typical installations include pulp and paper mills (bleached and unbleached stock, brown stock washers, black liquor evaporators, paper stock), power generation (fly ash pneumatic conveyance crossover switching), wastewater treatment (return activated sludge, pump isolation), the chemical industry (process fluids, pump and tank isolation), ethanol production (syrup lines), as well as pneumatic conveying, raw and treated water, and hydraulic transport of solids.

The body is cast in one piece in lug style. The seat is a steel-reinforced elastomer, held mechanically and geometrically in the body, so the valve achieves zero leakage in both directions. The seat can be replaced. A full-bore design gives an unobstructed passage with minimal pressure drop. The gate is guided along its full travel, and a clevis connection between gate and stem with a horizontal bolted fixing stabilises it. The cast yoke takes various actuator types and mounting positions. Up to and including 12 inches a body cavity liner is fitted as standard, and from 14 inches a PTFE anti-extrusion ring is used.

Stem sealing is by a multi-layer square packing as standard, with a compressed four-ring packing as an option. Packing temperature limits are 260 °C for PTFE, 232 °C for impregnated PTFE, and 90 to 200 °C for PTFE with elastomers. Seat limits are -36 to 90 °C for Buna-N, -54 to 120 °C for EPDM and -26 to 200 °C for fluoroelastomer.

Body materials are carbon steel WCB, stainless CF8, CF8M and CF3M, and duplex 2205 and 2507. Gates are available in stainless 304, 316 and 317, 17-4PH, duplex steels or nickel alloys, and the stem is stainless 304. Actuation can be by handwheel, bevel gearbox, pneumatic, hydraulic or electric actuator. The upper part is designed for a quick change from manual to pneumatic operation, and manual valves have a grease nipple for lubrication.

Face-to-face dimensions and design follow MSS SP81, with body and seat testing to MSS SP151, plus factory cycle tests. The valve meets AWWA C520 (2019) and PED Category I Module A, and holds CRN, PE(S)R, UA TR and ATEX approvals. Flanges are drilled to ASME B16.5 and ASME B16.47 Class 150.

Technical specifications

Typebidirectional knife gate valve, full bore
SizesNPS 2–36 / DN 50–900
Maximum working pressureDN 50–600: 150 psi / 10 bar; DN 750–900: 100 psi / 7 bar
Bodyone-piece cast, lug
Body materialsWCB, CF8, CF8M, CF3M, 2205, 2507
Gate materials304, 316, 317, 2507, 2205, 17-4PH, nickel alloys
Stemstainless steel 304
Seatreplaceable, steel-reinforced elastomer
Seat temperatureBuna-N -36…90 °C; EPDM -54…120 °C; fluoroelastomer -26…200 °C
Packing maximum temperaturePTFE 260 °C; impregnated PTFE 232 °C
DesignMSS SP81
TestingMSS SP151
ConnectionsASME B16.5, ASME B16.47 CL150
CertificatesAWWA C520 (2019), PED Category I Module A, CRN, PE(S)R, UA TR, ATEX
Actuatorshandwheel, bevel gearbox, pneumatic, hydraulic, electric

Request a price and lead time

Series 740 Bidirectional Knife Gate Valve, DN 50–900, Lug Body, up to 10 bar. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Can the valve be installed against reverse pressure?

Yes. The steel-reinforced elastomer seat gives zero leakage in both directions.

What is the maximum pressure for DN 750–900 valves?

The working pressure for DN 750–900 is 100 psi (7 bar), while DN 50–600 valves are rated to 150 psi (10 bar).

Which seat suits a medium up to 200 °C?

A fluoroelastomer seat works from -26 to 200 °C; pair it with PTFE packing.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides