International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Series 6P pneumatic positioner for quarter-turn valves, 3-15 psi signal

The 6P positioner drives quarter-turn control valves from a 3-15 psi pneumatic signal. A two-stage pilot relay gives a fast and sensitive response, so the unit also suits precise control of dampers. The standard double-acting version can be converted to single-acting with spring return.

Type
pneumatic P/P positioner
Input signal
3-15 psi, pneumatic
Angle of rotation
0° to 90°
Action
double-acting or single-acting with spring; direct and reverse

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The positioner is used on quarter-turn disc and ball valves, both standard and segmented, and on dampers where accurate positioning is needed. In modulating control, the 6P sets the valve at the required angle from 0° to 90° according to the incoming pneumatic signal.

The input signal acts on a bellows, followed by a flapper and nozzle system and a two-stage pilot relay that controls the air supply to the actuator. Position feedback is provided by a cam on the shaft. The standard unit is double-acting, and it can easily be converted to single-acting with spring return. Direct and reverse action are supported, split range, zero and span are adjustable, and a manual/automatic selector switch is fitted.

The housing is die-cast aluminium, anodised for internal corrosion resistance and then powder coated for external protection. All exposed parts are stainless steel or powder coated anodised aluminium, so the unit works in corrosive environments. A high natural frequency and pneumatic damping make it resistant to vibration. As standard a dome position indicator with a full viewing angle is fitted, along with three pressure gauges for signal, OUT 1 and OUT 2.

The 6P mounts directly on any quarter-turn actuator with a NAMUR (VDI/VDE 3845) interface, using an adjustable bracket. Pneumatic ports are 1/4 inch NPT. The unit needs clean, dry air at 20-100 psig (1.4-7.0 bar), runs in continuous duty, works from -20 to 70 °C and has IP66 protection.

Options include special cams for non-standard ranges, limit switches and a 4-20 mA position transmitter. A coalescing air filter is recommended for all positioners, as it removes dust, moisture and oil particles.

Technical specifications

Typepneumatic P/P positioner
Input signal3-15 psi, pneumatic
Angle of rotation0° to 90°
Actiondouble-acting or single-acting with spring; direct and reverse
Supply pressure20-100 psig (1.4-7.0 bar)
Supply mediumclean, dry air
Ports1/4 inch NPT
Dutycontinuous
Temperature-20 to 70 °C
ProtectionIP66
MountingVDI/VDE 3845 (NAMUR)
Housingdie-cast aluminium, anodised, powder coated
Gauges3: signal, OUT 1, OUT 2
Optionsspecial cams, limit switches, 4-20 mA position transmitter

Request a price and lead time

Series 6P pneumatic positioner for quarter-turn valves, 3-15 psi signal. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Can the 6P be used on a single-acting actuator?

Yes. The standard double-acting positioner can easily be converted to single-acting with spring return.

What air pressure is needed for the supply?

20-100 psig (1.4-7.0 bar) of clean, dry air. A coalescing filter is recommended.

Is there a position feedback signal?

Yes. A 4-20 mA position transmitter and limit switches are available as options.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides