
Series 5A Resin Valve Position Switch Box, Polymer Housing, 2 Switches, IP66/67/68
The Series 5A switch box gives visual and electrical indication of quarter-turn valve position in a light, compact housing. It has a PBT base reinforced with glass fibre, a one-piece polycarbonate cover and two switches, and weighs about 0.4 kg.
- Base material
- PBT reinforced with glass fibre
- Cover and indicator dome
- polycarbonate
- Seal
- EPDM
- Protection rating
- IP66/67/68, NEMA 4/4x
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The unit mounts on the actuator of a quarter-turn valve following the VDI/VDE 3845 (NAMUR) pattern to signal the open and closed positions. Its main markets are oil and gas, chemicals and petrochemicals, and water treatment and effluent cleaning. The low weight and body diameter of 50 mm suit small actuators and tight installations.
The base is moulded from glass-fibre reinforced PBT, while the cover and indicator dome are one piece of polycarbonate, and the O-rings are EPDM. The housing resists corrosion, wear, impact and ultraviolet light and carries an IP66/67/68 rating with NEMA 4/4x. Captive stainless steel cover bolts sit outside the sealing zone. The open and closed indication can be reversed by turning an internal shutter through 90 degrees.
Two switches are fitted as standard. The mechanical SPDT switches 10 A at 250 V AC, while the low-power SPDT is rated at 180 mA at 110 V AC. The reed switch handles up to 0.25 A at 250 V DC. Three-wire PNP and NPN sensors run from 10 to 30 V DC with loads up to 100 mA. Two-wire 140 V sensors operate at 20 to 140 V AC or 10 to 140 V DC, and the 250 V versions at 20 to 250 V AC or 10 to 300 V DC. Intrinsically safe NAMUR sensors draw at least 3 mA when deactivated and no more than 1 mA when activated.
Terminal blocks take 4 or 8 poles, and there are two cable entries of 1/2 inch NPT or M20. The cams are set without tools, and the earth bolt is marked green. The operating temperature runs from -25 to 65 °C. Height is 92.5, 107.4 or 130.2 mm depending on version, and fixing uses four M6 or 1/4-20 UNC screws. The unit carries a CE declaration, the mechanical and reed switches are SIL 3 capable, and NAMUR sensors hold ATEX and IECEx approval.
Technical specifications
| Base material | PBT reinforced with glass fibre |
|---|---|
| Cover and indicator dome | polycarbonate |
| Seal | EPDM |
| Protection rating | IP66/67/68, NEMA 4/4x |
| Mounting | VDI/VDE 3845 (NAMUR) |
| Operating temperature | -25...65 °C |
| Number of switches | 2 |
| Mechanical SPDT | 10 A, 250 V AC |
| Reed switch | 0.25 A, 250 V DC |
| PNP / NPN 3-wire | 10–30 V DC, up to 100 mA |
| Terminal blocks | 4 or 8 poles |
| Cable entries | 2 x 1/2 inch NPT or M20 |
| Body diameter | 50 mm |
| Height | 92.5 / 107.4 / 130.2 mm |
| Weight with 2 x SPDT | 0.4 kg |
| Certification | CE, SIL 3, optional ATEX and IECEx |
Request a price and lead time
Series 5A Resin Valve Position Switch Box, Polymer Housing, 2 Switches, IP66/67/68. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
How does the 5A series differ from the 5B?
The 5A has a compact 50 mm diameter body with two switches and weighs about 0.4 kg. The 5B holds up to 6 switches and supports network protocols.
Can the unit be used in explosive atmospheres?
Yes, with NAMUR intrinsically safe sensors, which carry ATEX and IECEx approval.
What current does the mechanical switch handle?
The standard SPDT switches 10 A at 250 V AC, and the low-power SPDT switches 180 mA at 110 V AC.
Similar equipment from other manufacturers






