International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Series 54-HS Inductive Valve Position Sensor for Hazardous Areas, NAMUR or DC 2-Wire

The Series 54-HS detects the open and closed positions of quarter-turn valves in hazardous areas without contact. It is supplied as an intrinsically safe NAMUR version or as a DC two-wire version rated IP66/67/69K.

Type
Inductive position sensor, 2 sensors
Output
NAMUR (intrinsically safe); DC two-wire, 2 x NO
Supply voltage
NAMUR 8 V; DC two-wire 6 - 30 V
Rated operating distance
NAMUR 0…2.4 mm; DC 0…2.05 mm

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The 54-HS is designed for process plants where quarter-turn valves must report their open and closed positions from inside a hazardous area. It copes with high pressure washdowns, caustic cleaning solutions, dirty process lines and frequent cycling, so it is often chosen where mechanical limit switches would soon wear out.

Inside the housing sit two independent inductive sensors, one for each end of travel. Because nothing touches the target, there is no contact wear, no welding of contacts and no arcing or sparking. The body is hermetically sealed against liquids and solids, and it resists shock, vibration, ultraviolet light and corrosion. LEDs show sensor power, switching state and solenoid status, and the unit needs no maintenance.

The intrinsically safe variant follows the NAMUR convention and runs from an 8 V intrinsically safe circuit. It senses from 0 to 2.4 mm, switches up to 3 kHz, carries an IP67 rating and works between -25 and 100°C. It holds a cULus Listed, General Purpose approval under file E248934. The DC two-wire variant runs from 6 to 30 V, senses from 0 to 2.05 mm, switches up to 100 Hz, carries IP66/67/69K and tolerates temperatures from -40 to 75°C.

Mounting follows the VDI/VDE 3845 pattern, so the sensor fits straight onto a compliant actuator and keeps the actuator profile small. The intrinsically safe version connects through a single M12 x 1 plug, a pair of M12 x 1 and RD24x18 plugs, or two M20 x 1.5 cable glands. Switching points are set with the activator fitted to the valve stem.

Technical specifications

TypeInductive position sensor, 2 sensors
OutputNAMUR (intrinsically safe); DC two-wire, 2 x NO
Supply voltageNAMUR 8 V; DC two-wire 6 - 30 V
Rated operating distanceNAMUR 0…2.4 mm; DC 0…2.05 mm
Switching frequencyNAMUR 0…3 kHz; DC 0…100 Hz
Enclosure ratingNAMUR IP67; DC IP66/67/69K
Temperature rangeNAMUR -25…100°C; DC -40…75°C
MountingNAMUR / VDI/VDE 3845
Connection (NAMUR)M12 x 1; M12 x 1 and RD24x18; two M20 x 1.5 cable glands
CertificationscULus Listed, General Purpose (E248934)

Request a price and lead time

Series 54-HS Inductive Valve Position Sensor for Hazardous Areas, NAMUR or DC 2-Wire. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

How do the NAMUR and DC two-wire versions differ?

The NAMUR version runs from an 8 V circuit, switches up to 3 kHz and carries IP67. The DC two-wire version runs from 6 to 30 V, switches up to 100 Hz and carries IP66/67/69K.

Which version copes with the lowest temperatures?

The DC two-wire version operates from -40 to 75°C. The intrinsically safe NAMUR version operates from -25 to 100°C.

How is the intrinsically safe sensor connected?

You can use a single M12 x 1 plug, a pair of M12 x 1 and RD24x18 plugs, or two M20 x 1.5 cable glands.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides