
Series 31U Lug-Type Resilient Seated Butterfly Valve, NPS 2 to 12, Fire Protection
The 31U series resilient seated butterfly valves have a BUNA-N seat bonded to the body. They are intended for onshore and offshore fire protection systems and carry D.O.T. 54 certification, with bidirectional bubble-tight shutoff at up to 285 psi (20 bar).
- Type
- resilient seated butterfly valve
- Sizes
- NPS 2 to 12 / DN 50 to 300
- Body type
- lug
- Body material
- ductile iron, carbon steel, nickel-aluminium bronze
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The 31U series is aimed at onshore and offshore fire protection systems that require D.O.T. 54 certification, as well as industrial and marine high-pressure lines in dead-end service. The valve handles high flow velocities and high pressure, and it provides bidirectional bubble-tight shutoff.
The body is a one-piece lug type, available in ductile iron, carbon steel or nickel-aluminium bronze. It is drilled to ASME Class 125/150, EN 1092 PN 10, 16, 25 and other international flange standards. The extended neck leaves room for pipe insulation and makes actuator fitting easier.
The BUNA-N seat is bonded to the body in a tongue and groove arrangement. It isolates the process medium from every valve part except the disc, and it gives a lower operating torque. A moulded tangential sealing ring on the seat face removes the need for flange gaskets. The primary seal comes from the interference between the flat part of the seat and the disc hub, and a secondary seal arises because the stem diameter is larger than the hole in the seat.
The upper and lower stems are of increased strength and are joined to the disc by a precise double D profile, so the stem fixings do not contact the medium and disassembly is simpler. A retaining rod and C-rings prevent the stem from being removed by accident during maintenance. An acetal bushing takes the side load from the actuator. Manual gearboxes and electric or pneumatic actuators from the same range fit directly, without brackets.
Discs are made from 316 stainless steel, K500 alloy or nickel-aluminium bronze, and stems from stainless steel, 17-4PH or K500 alloy. The working temperature range is -18 to 100 °C. Face-to-face dimensions follow API 609 Category A and EN 558 Series 20, and testing is carried out to API 598 and EN 12266-1. The series holds certificates from ABS, ATEX, CRN, DNV, D.O.T. 54, NSF 61/372, PED and PE(S)R.
Technical specifications
| Type | resilient seated butterfly valve |
|---|---|
| Sizes | NPS 2 to 12 / DN 50 to 300 |
| Body type | lug |
| Body material | ductile iron, carbon steel, nickel-aluminium bronze |
| Disc material | 316 stainless steel, K500 alloy, nickel-aluminium bronze |
| Stem material | stainless steel, 17-4PH, K500 alloy |
| Seat | bonded BUNA-N |
| Temperature | from 0 to 212 °F (from -18 to 100 °C) |
| Maximum allowable operating pressure | 285 psi (20 bar) |
| Shutoff | bidirectional bubble-tight |
| Flanges | ASME Class 150, EN 1092 PN 10, 16, 25 |
| Face to face | API 609 Category A, EN 558 Series 20 |
| Testing | API 598, EN 12266-1 |
| Certificates | ABS, ATEX, CRN, DNV, D.O.T. 54, NSF 61/372, PED, PE(S)R |
Part numbers
Show all part numbers (1)
31U
Request a price and lead time
Series 31U Lug-Type Resilient Seated Butterfly Valve, NPS 2 to 12, Fire Protection. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which systems is the 31U series intended for?
Onshore and offshore fire protection systems with D.O.T. 54 certification, and industrial and marine high-pressure lines in dead-end service.
Are flange gaskets needed when fitting the valve?
No. A moulded tangential ring on the seat face serves as the seal, and no gaskets are required with metal flanges.
What pressure and temperature can the valve handle?
A maximum operating pressure of 285 psi (20 bar), with a temperature range from -18 to 100 °C.
Similar equipment from other manufacturers






