
SA16 external weight and lever for NPS 2 to 24 swing check valves
The SA16 turns a standard single-disc swing check valve into one with an external lever and weight. The weight raises the disc opening pressure and the force needed to close it, and its position on the lever is adjusted on site. It covers sizes NPS 2 to 24 (50 to 600 mm).
- Type
- external weight and lever for swing check valve
- Sizes
- NPS 2-24 (50-600 mm)
- Base valve series
- 205, 210, 211
- Body
- single body, flanged or wafer
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
An external weight and lever is used where the closing behaviour of a check valve has to be changed on site, for example in systems with solid particles, on vacuum lines, and in drainage and wastewater treatment. Typical media include dry chlorine in gas or liquid phase, gases, hydrogen, oxygen and water.
The base product is a standard single-disc swing check valve in wafer or flanged single body design, series 205, 210 or 211. Disc, hinge and shaft are joined by a hexagonal drive. The shaft passes through the body, supported at one end by the body and the gland bush and at the other by a ball bearing in a bracket that reduces friction. Four sealing rings seal the shaft, bush and body against leakage.
The weight is fixed to the lever, and the lever is fitted onto the shaft through a hexagonal joint. Moving the weight along the lever reduces or increases the disc opening pressure within set limits. The weight produces the moment needed to close the valve. The right-hand mounting arrangement is supplied as standard.
The gland bush is made of ASTM A479 316 stainless steel, and the sealing rings are available in BUNA-N, EPDM, FKM-A, HNBR or neoprene. The lever, weight and bracket are steel, while the screws and pins are zinc-plated steel, and all external parts can be supplied in stainless steel on request. Seat options are integral hard (IHS), hard replaceable ring (SRHS), integral soft (ISS) and soft replaceable ring (SRSS). Tightness is tested to API 598 and dimensions follow ASME and DIN standards. The example number V0215XBZ205SA16 stands for a 2-inch, Class 150 valve with an ASTM A351 CF8M stainless steel body, a BUNA-N ring and series 205.
Technical specifications
| Type | external weight and lever for swing check valve |
|---|---|
| Sizes | NPS 2-24 (50-600 mm) |
| Base valve series | 205, 210, 211 |
| Body | single body, flanged or wafer |
| Leakage | API 598 |
| Media | dry chlorine (gas or liquid), gases, hydrogen, oxygen, water |
| Gland bush | stainless steel ASTM A479 316 |
| Sealing rings (4 pcs) | BUNA-N, EPDM, FKM-A, HNBR, neoprene |
| Lever, weight, bracket | steel |
| Seat options | IHS, SRHS, ISS, SRSS |
| Dimension standards | ASME, DIN |
Part numbers
Show all part numbers (1)
V0215XBZ205SA16
Request a price and lead time
SA16 external weight and lever for NPS 2 to 24 swing check valves. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
How is the opening pressure changed?
By moving the weight along the lever. This reduces or increases the disc opening pressure within set limits.
Which valves is the SA16 compatible with?
Standard single-disc swing check valves in series 205, 210 and 211, in wafer or flanged design, NPS 2-24.
Can the external parts be made of stainless steel?
Yes. On request all external parts can be made of stainless steel, and the gland bush is stainless steel ASTM A479 316 as standard.
Similar equipment from other manufacturers






