International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

S19 and S19L Segmented Ball Control Valves for Sugar Processing, NPS 1 to 16

Series 19 segmented ball control valves for regulation and shut-off on abrasive and dirty media in sugar plants. The S19 is the standard version, while the S19L is built for severe service with erosion-resistant downstream liners and seats.

Size range
NPS 1 to 16 (DN 25 to 400)
Application
regulation, shut-off
Pressure classes
ASME Class 150, 300, 600
Leakage class
soft seat Class VI, metal seat Class IV (ANSI/FCI 70-2, IEC 60534-4)

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Sugar factories and refineries fit these valves on lines carrying raw juice, flocculant, milk of lime, thin and clear juice, filter cake, steam, syrup, condensate, wet ash, pressed pulp water, diffuser spent water and flume wash water. Standard valves on such media tend to build up solids or wear out quickly through erosion. According to the manufacturer, the S19L showed no sign of abrasive wear or erosion after more than 36 months in comparable service.

The body is one piece with no joints through which fluid could escape, and it carries the pipeline loads. A splined connection between the stem and the segment transmits torque with low hysteresis and a small dead band, which gives precise control. A spring-energised seat seals at low differential pressure and lowers the torque needed at high differential pressure. Seat geometry steers the flow away from the sealing zone, internal coatings protect against corrosion, and all wear parts can be replaced in the field.

The S19L adds liners and seats of high hardness on the outlet side, which protect the body wall and the seat from erosion at high velocities. Trim is available in special materials and ultra-hard coatings for the segment and the body bore, and bearing seals keep the medium out of the shaft and gland area. A flanged retainer gives access to the seat and liner from outside, so the seat can be changed without removing the segment or the shaft. Several face-to-face lengths cover the most common rotary control valves.

The valves cover NPS 1 to 16 (DN 25 to 400) and ASME Class 150, 300 and 600. Temperatures from -46 °C to 260 °C (-50 °F to 500 °F) are covered. Shut-off is Class VI with a soft seat and Class IV with a metal seat, to ANSI/FCI 70-2 and IEC 60534-4. The flow characteristic is equal percentage with a rangeability of 300:1. Standard, 60° and 30° port designs are available, others on request. End connections are flanged or flangeless (wafer), with face-to-face dimensions to ISA 75.08.02, and ASME B16.10 is optional.

Technical specifications

Size rangeNPS 1 to 16 (DN 25 to 400)
Applicationregulation, shut-off
Pressure classesASME Class 150, 300, 600
Leakage classsoft seat Class VI, metal seat Class IV (ANSI/FCI 70-2, IEC 60534-4)
Temperature-46 to 260 °C
Portstandard, 60°, 30°; others on request
Bodysingle piece
Flow characteristicequal percentage
End connectionsflanged, flangeless (wafer)
Rangeability300:1
Face-to-face dimensionsISA 75.08.02 (optional ASME B16.10)

Part numbers

Show all part numbers (2)

S19, S19L

Request a price and lead time

S19 and S19L Segmented Ball Control Valves for Sugar Processing, NPS 1 to 16. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

When should I choose the S19L instead of the S19?

The S19L suits abrasive media with solid particles, such as raw juice, filter cake, wet ash and diffuser spent water. The S19 is intended for cleaner media such as syrup, clear juice and steam.

What leakage class does the valve achieve?

With a soft seat it reaches Class VI, and with a metal seat Class IV, to ANSI/FCI 70-2 and IEC 60534-4.

Is it necessary to remove the segment to change the seat?

No. On the S19L the seat and liner can be reached from outside through the flanged retainer and replaced without removing the segment or the shaft.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides