
Resolute Ball Replacement Ball for F15/F30 and RF15/RF30 Flanged Ball Valves, NPS 1/2 to 12
The Resolute Ball fits in place of the standard ball in flanged ball valves of the F15/F30 and RF15/RF30 series. Its geometry limits contact with the seats as the valve turns, so scale and deposits are not scraped off by the seat and do not raise the operating torque.
- Type
- replacement ball for flanged ball valves
- Compatible series
- F15/F30, RF15/RF30
- Sizes F15/F30
- NPS 1/2 to 12 (DN 15 to 300)
- Sizes RF15/RF30
- NPS 1 to 12 (DN 25 to 300)
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Where pulp and paper, mining, petrochemical and refining media are handled, a thick layer of scale tends to build up on the inlet side of the ball, particularly when a valve stays closed for long periods. A standard spherical ball stays in contact with its seat through the whole 90-degree turn, so deposits are dragged across the sealing zone. The seat scrapes the scale off, the torque rises sharply, the valve becomes hard to operate, and seat leakage, sheared stems and jamming can follow.
The Resolute Ball has a special geometry. After the first 10 degrees of rotation, contact between the ball and the seats is minimal, and the process fluid washes particles past the ball and the seats. According to the manufacturer, wear is reduced by up to 70%. The square shape lessens the effect of deposits on the sealing surface and lets particles pass through the cavity of the ball. The outcome is lower operating torque, a longer seat life and consistent switching.
The ball fits two-piece flanged valves F15/F30 in full-bore design from NPS 1/2 to 12 (DN 15 to 300), and one-piece valves RF15/RF30 in standard bore from NPS 1 to 12 (DN 25 to 300), without modifying the valve body. F15 and RF15 valves have ANSI 150 RF flanges, while F30 and RF30 have ANSI 300 RF flanges. Bodies are supplied in 316 stainless steel, WCB carbon steel or Alloy 20.
A configuration with the Resolute Ball requires a 17-4 PH stainless steel stem, with seats made from PEEK, TFM or Tek-Fil®. The combination of PEEK and Tek-Fil® seats is specified with code 0242. The design meets API 641 and ISO 15848 requirements for fugitive emissions. Valves in the series come with a lockable lever, and a gearbox is recommended for full-bore valves from 6 inches. Flat-faced or RTJ ring-joint flanges are made to order.
Typical media include white, green and black liquor, PVC chlorides, polymers and monomers, abrasive slurries, media prone to calcination and crystallisation, and produced water. The ball is used for drain and tank isolation, pump isolation, and in mineral extraction and petrochemical plants.
Technical specifications
| Type | replacement ball for flanged ball valves |
|---|---|
| Compatible series | F15/F30, RF15/RF30 |
| Sizes F15/F30 | NPS 1/2 to 12 (DN 15 to 300) |
| Sizes RF15/RF30 | NPS 1 to 12 (DN 25 to 300) |
| Flanges | ANSI 150 RF (F15, RF15), ANSI 300 RF (F30, RF30) |
| Valve body material | 316 SS, WCB, Alloy 20 |
| Stem material | 17-4 PH |
| Seats | PEEK, TFM, Tek-Fil® |
| Ball to seat contact | minimal after 10° of rotation |
| Wear reduction | up to 70% |
| Fugitive emissions | API 641, ISO 15848 |
Part numbers
Show all part numbers (4)
F15, F30, RF15, RF30
Request a price and lead time
Resolute Ball Replacement Ball for F15/F30 and RF15/RF30 Flanged Ball Valves, NPS 1/2 to 12. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which valves can the Resolute Ball be fitted to?
Flanged ball valves F15/F30 in NPS 1/2 to 12 and RF15/RF30 in NPS 1 to 12, as a direct replacement for the standard ball.
Which stem is required for the Resolute Ball configuration?
A stem in 17-4 PH stainless steel is mandatory; PEEK and Tek-Fil® seats are specified with code 0242.
What media is this ball intended for?
Media that form scale and deposits, such as pulp-mill liquors, PVC chlorides, polymers, abrasive slurries and produced water.
Similar equipment from other manufacturers






