
KCA Series Linear Position Sensor for Pneumatic Knife Gate Valve Actuators, Stroke up to 900 mm
The KCA is a non-contact cable linear position sensor for pneumatic knife gate valve actuators. It outputs an analogue 4 to 20 mA signal over the full piston stroke and fits both new and existing actuators.
- Type
- cable non-contact linear position sensor
- Analogue output
- 4–20 mA DC; option 0–20 mA DC, 0–10 V DC
- Power supply
- 12–32 V DC, 24 V DC recommended
- Mains supply
- 110/120 V AC through external power supply
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The KCA series tracks the position of a linear actuator rod through its whole stroke. It fits pneumatic knife gate valve actuators, including those already installed, so it can be retrofitted in place. The application covers both on-off valves and control valves.
Measurement is by cable. A pull cable attaches to the piston head of the actuator, and a non-contact sensing system reads the rotation of the cable drum, calculates the linear travel and delivers it as an analogue current or voltage signal. No levers or external linkages are needed, which are customary with limit switches. The maximum stroke is 900 mm.
The main output is 4 to 20 mA DC, with 0 to 20 mA DC and 0 to 10 V DC available as options. It runs from 12 to 32 V DC, with 24 V DC recommended, or from 110/120 V AC through an external power supply. Current consumption is below 32 mA, power input 0.5 W, internal load RB 200 ohms, and the static destruction limit 40 mA.
The housing is carbon steel with an epoxy-based polyurethane coating, and the electronics are fully potted in compound. The sensor withstands strong vibration and shock and keeps its position after power is switched off. Operating temperature runs from −30 to +100 °C (−22 to +212 °F). Connection is made through an M12 connector, and a single analogue signal is simpler to maintain than a set of discrete switches.
The installation instruction describes removing the cover of an existing actuator, assembling the sensor kit with its adaptor, calibrating it, and integrating it with the 6A series positioner through the AIM 6A6DR4-0048F module.
Technical specifications
| Type | cable non-contact linear position sensor |
|---|---|
| Analogue output | 4–20 mA DC; option 0–20 mA DC, 0–10 V DC |
| Power supply | 12–32 V DC, 24 V DC recommended |
| Mains supply | 110/120 V AC through external power supply |
| Current consumption | < 32 mA |
| Power input | 0.5 W |
| Internal load RB | 200 ohms |
| Static destruction limit | 40 mA |
| Maximum stroke | 900 mm |
| Operating temperature | −30…+100 °C (−22…+212 °F) |
| Housing | carbon steel, epoxy-based polyurethane coating |
| Connection | M12 connector |
| Valve modes | on-off and control |
Part numbers
Show all part numbers (1)
KCAXX00-2160B001
Request a price and lead time
KCA Series Linear Position Sensor for Pneumatic Knife Gate Valve Actuators, Stroke up to 900 mm. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Can the KCA be fitted to an actuator that is already installed?
Yes, the sensor is installed on existing pneumatic knife gate valve actuators. The instruction describes removing the actuator cover and assembling the kit with its adaptor.
What output signal and supply does it use?
The standard output is 4 to 20 mA DC, with 0 to 20 mA or 0 to 10 V DC optional. The supply is 12 to 32 V DC, with 24 V DC recommended.
Does the position hold after the power is switched off?
Yes, the sensor keeps its position after power is removed. The electronics are fully potted in compound and withstand vibration and shock.
Similar equipment from other manufacturers






