International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

1 in HL-11-SW Class 800 Gate Valve, A105 Body, Socket Weld Ends, Full Bore

A full bore forged gate valve, 1 in and Class 800, with a bolted bonnet, an outside screw and yoke stem and socket weld ends on both sides. The body is A105, the trim is F6/HF and the seats carry a Stellite 6 overlay.

Size
1 in
Class
800
Bore
full
Connection
Socket Weld × Socket Weld

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The HL-11-SW GATE LE valve belongs to the series of forged gate valves with bolted bonnets in Classes 800 and 1500, with full and standard bore. This 1 inch model is Class 800 with a full bore, so flow resistance in the open position is minimal and the line can be cleaned or purged without a narrowed section. It is used as an isolation valve on oil and gas, steam, chemical and petrochemical pipelines, in refineries, power plants and general industrial piping.

Both ends are socket weld hubs to ASME B16.11, which removes threaded joints where leaks can occur and suits lines with high pressure and thermal cycling. Pressure ratings reach 1975 psi when measured at 100 ºF, and the pressure and temperature ratings follow ASME B16.34.

The body is forged from A105N steel and the bonnet from A105. The trim is F6/HF to API trim 8, with an ASTM A182 F6a wedge, an ASTM A479 410 stem and seat rings in ASTM A479 410 with a Stellite 6 overlay. Bonnet bolts are A193 B7, gland studs are A193 B6 with A194 2H nuts, the gland flange is A105 and the yoke bush is AISI 416. The bonnet and gland seals are graphite based with 316L.

The stem sits outside the fluid in the outside screw and yoke (O.S.&Y.) design, with a handwheel, so the valve position can be seen at a glance. The flow coefficient Cv is 32. During assembly the body and bonnet bolts are torqued to 50 ft-lbs and the gland nuts to 3.2 ft-lbs. The design meets API 602, ASME B16.34 and BS 5352, with testing to API 598 and marking to MSS SP25. The valve weighs 7.75 lb. The drawing gives 5.00 in for A, 8.86 in for B, 3.82 in for C, 0.89 in for F and 2.20 in for G, and these are for reference only, with certified sizes for a project coming from the manufacturer.

Technical specifications

Size1 in
Class800
Borefull
ConnectionSocket Weld × Socket Weld
Body / bonnet materialA105N / A105
TrimF6/HF (API trim 8)
WedgeASTM A182 F6a
StemASTM A479 410
SeatsASTM A479 410 + Stellite 6
Bonnet boltsA193 B7
Working pressure1975 psi rating at 100 ºF
Cv32
Bonnet bolt torque50 ft-lbs
Gland nut torque3.2 ft-lbs
Weight7.75 lb
Dimensions A / B / C / F / G5.00 / 8.86 / 3.82 / 0.89 / 2.20 in
StandardsAPI 602, ASME B16.34, BS 5352, API 598, MSS SP25, ASME B16.11

Part numbers

Show all part numbers (1)

1″ HL-11-SW GATE LE

Request a price and lead time

1 in HL-11-SW Class 800 Gate Valve, A105 Body, Socket Weld Ends, Full Bore. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What end connections does the HL-11-SW have?

Both ends are socket weld hubs to ASME B16.11 for 1 inch pipe. A version with an NPT thread on the outlet is marked HL-11-SW/T.

What is the flow coefficient of this valve?

The Cv coefficient is 32 with full bore flow.

What torque is needed during assembly?

Body and bonnet bolts are tightened to 50 ft-lbs and gland nuts to 3.2 ft-lbs.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides