International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Forged Steel Wedge Gate Valves, Classes 150 to 4500, Sizes Up to 42 NPS

Forged steel wedge gates provide straight-through flow for pipeline shut-off. Sizes run from NPS 1/4 to NPS 42 in classes 150 to 4500, with a bolted or welded bonnet, and the design is covered by ASME B16.34, API 600 and API 602.

Type
wedge gate valve, forged steel
Sizes
NPS 1/4–42
Pressure classes
150–4500
Design
API 602, API 600, ASME B16.34

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Gate valves are intended for on-off service where straight flow with minimal resistance is needed. The wedge-shaped closure element rises and falls to close or open the passage, and in the open position it is fully withdrawn into the body, leaving the bore clear so the pressure drop across the valve stays small. These valves are not used for throttling. Typical fields are oil and gas, pharmaceuticals, general engineering, automotive and shipbuilding.

All pressure-containing parts are die-forged, and flanges on flanged valves are forged together with the body. The stem rises outside on a yoke (OS&Y), and the wedge is fully guided, which reduces wear on the seating surfaces. Seat friction is low, operating torque is modest, and the Cv value is high.

The bonnet is available in two versions. A bolted bonnet has a tongue-and-groove joint with a F316L/graphite spiral wound gasket, and from class 2500 upward a ring joint (RJ) gasket is standard. On request both gasket types are available for all pressure classes. A welded bonnet has a threaded joint with a seal weld, and on request it can be made with a full-penetration structural weld.

Stem packing meets API 622 and has low fugitive emissions in line with API 624. The gland is two-piece and self-aligning. Fugitive emissions are verified against API 624, while ISO 15848 and TA Luft apply as well.

Design follows API 602, API 600 and ASME B16.34, inspection and testing follow API 598, and marking follows MSS SP-25. Face-to-face dimensions follow ASME B16.10. Ends can be socket weld to ASME B16.11, NPT threaded to ASME B1.20.1, flanged to ASME B16.5 or butt weld to ASME B16.25. Overall dimensions are given in the product catalogue.

Technical specifications

Typewedge gate valve, forged steel
SizesNPS 1/4–42
Pressure classes150–4500
DesignAPI 602, API 600, ASME B16.34
Inspection and testingAPI 598
MarkingMSS SP-25
Fugitive emissionsAPI 624, ISO 15848, TA Luft
Stem packingAPI 622
Face-to-faceASME B16.10
Socket weld endsASME B16.11
Threaded NPT endsASME B1.20.1
Flanged endsASME B16.5
Butt weld endsASME B16.25
Bonnetbolted or welded
Stemrising, outside screw and yoke (OS&Y)

Request a price and lead time

Forged Steel Wedge Gate Valves, Classes 150 to 4500, Sizes Up to 42 NPS. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Which bonnet can be ordered?

A bolted bonnet with an F316L/graphite spiral wound gasket or a RJ ring gasket, or a welded bonnet with a seal weld or, on request, a full-penetration structural weld.

Is the gate valve suitable for flow regulation?

No. Gate valves work only in the on-off mode, and they are not used for throttling.

Which emission standards apply?

Stem packing to API 622, fugitive emissions verified against API 624, and ISO 15848 with TA Luft alongside.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides