International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Forged Steel Integral Flange Valves, NPS 1/2 up to 42, Pressure Class 150 up to 4500

Forged steel gate, globe and check valves, with each flange forged together with the body. Sizes start at NPS 1/2 and reach NPS 42 in ASME classes 150 to 4500, designed to ASME B16.34, API 594 and API 602.

Type
Gate, globe and check valves (piston, ball and swing)
Size
NPS 1/2 to NPS 42
Pressure class
150 to 4500
Body
Forged steel, flanges forged integrally with the body

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

These valves are used on pipework in oil and gas, power generation, chemical and petrochemical plants, refineries and general industrial lines. Each flange is produced from the same forging as the body, so there is no weld between the two to inspect and no weld that could later become a leak path. Every pressure containing part is made by full die forging.

Available types are gate valves, globe valves, piston check valves, ball check valves and swing check valves. Sealing faces are machined to the tightest tolerances and smoothest finish, which helps the valve shut off reliably through repeated cycling. In the swing check, the disc and hinge assembly is arranged to create a closing moment, so the valve closes and seals even at low pressures. The check designs also have a low cracking pressure, and the flow coefficient (Cv) is a stated strength of the range.

Bonnets can be bolted or welded. A bolted bonnet uses a tongue and groove joint with a spiral wound F316L and graphite gasket, while a ring type RTJ gasket can be ordered instead. A welded bonnet is joined by a threaded seal weld, with a full penetration weld available on request. Spiral wound gaskets are standard up to ASME Class 1500, and RTJ gaskets are standard from Class 2500 upward.

Construction standards are ASME B16.34, API 602 and API 594. Inspection and testing follow API 598, and MSS SP-25 governs marking. Emission control is covered by ISO 15848, API 624 and TA Luft, while overall length conforms to ASME B16.10. Besides ASME B16.5 flanged ends, socket weld ends to ASME B16.11, threaded NPT ends to ASME B1.20.1 and butt weld ends to ASME B16.25 can be supplied.

Technical specifications

TypeGate, globe and check valves (piston, ball and swing)
SizeNPS 1/2 to NPS 42
Pressure class150 to 4500
BodyForged steel, flanges forged integrally with the body
BonnetBolted or welded
Bonnet gasketSpiral wound F316L/graphite up to class 1500; RTJ from class 2500
DesignAPI 602, API 594, ASME B16.34
Inspection and testingAPI 598
MarkingMSS SP-25
Fugitive emissionsAPI 624, ISO 15848, TA Luft
Overall lengthASME B16.10
Flanged endsASME B16.5
Other endsASME B16.11 (socket weld), ASME B1.20.1 (NPT), ASME B16.25 (butt weld)

Request a price and lead time

Forged Steel Integral Flange Valves, NPS 1/2 up to 42, Pressure Class 150 up to 4500. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Which valve types are offered with integral flanges?

The range includes gate and globe valves, plus piston, ball and swing check valves. In every case the flanges are forged together with the body.

What advantage does an integral flange have over a welded flange?

No weld joins the flange to the body, so there is no weld to inspect and no weld that could become a leak point. Every pressure part is also made by full die forging.

Which gasket is fitted in higher pressure classes?

A spiral wound F316L and graphite gasket is standard up to Class 1500. An RTJ ring gasket is standard for Class 2500 and above, and either type can be ordered for any class.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides