International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Forged floating ball valves, NPS 3/8 to 8, ASME Class 150 to 2500

Forged floating ball valves shut off liquids and gases in both directions in on/off service. The design meets ASME B16.34, ISO 17292 and API 608, and fire resistance is verified to API 607. Base, cryogenic and high temperature versions are offered for erosive media.

Type
forged floating ball valve
Sizes
NPS 3/8-8
Pressure class
ASME 150-2500
Design standards
ASME B16.34, ISO 17292, API 608

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

A floating ball valve belongs to the quarter-turn family. The hollow ball has a bore, which is closed when the handle turns it 90 degrees and open when the bore lines up with the flow. The ball is not fixed on bearings but is held between two seats, and line pressure presses it against the downstream seat. The valve shuts off in both directions, performs well after many cycles and seals tightly even after long idle periods, which is why it is often chosen for isolation duty in place of gate valves and other shut-off valves.

As the diameter grows, the force of pressure on the ball increases and the seats can no longer hold it, so trunnion ball valves are used for large diameters and high pressures. Floating ball valves are not meant for throttling; they must be either fully open or fully closed.

All pressure-containing parts are fully forged. The body and cover are bolted together, and the flanges are formed as one piece with the body. For ASME 800 class the body is a split-body design as standard. The main gasket is a ring type with AED properties, and a secondary emergency seal is always present for fire protection. The stem seal carries a constant preload, the stem is blow-out proof, and an anti-static spring sits between stem and ball. The seats are pressure-relieved from the body cavity. The stem ends in a square for a handle or actuator, and the ISO 5211 mounting flange is forged together with the body.

The range comes as a base version with full or reduced bore, a cryogenic version with a pressure-equalising hole in the ball, and a high temperature version for erosive media in sizes 1/2 to 2 NPS. The body is in two pieces and is operated by lever or gearbox. Some versions have a carbon steel body with phosphate coating. Sample codes are L1 704 (3/4 NPS, ASME 150), L3 708 (2 NPS, ASME 150) and L6 705 (1 NPS, ASME 300).

Testing follows API 598, marking follows MSS SP-25, and fugitive emissions are checked to API 641 and ISO 15848. Ends are flanged to ASME B16.5, butt weld to ASME B16.25, socket weld to ASME B16.11 or threaded NPT to ASME B1.20.1, and the laying length follows ASME B16.10.

Technical specifications

Typeforged floating ball valve
SizesNPS 3/8-8
Pressure classASME 150-2500
Design standardsASME B16.34, ISO 17292, API 608
TestingAPI 598, API 607
MarkingMSS SP-25
Fugitive emissionsAPI 641, ISO 15848
Face-to-faceASME B16.10
Endsflanged ASME B16.5, butt weld ASME B16.25, socket weld ASME B16.11, NPT ASME B1.20.1
Actuator mountingISO 5211, flange forged into the body
Versionsbase, cryogenic, high temperature for erosive media
Borefull or reduced
Constructiontwo-piece body, lever or gearbox operation
Featuresstem seal with preload, anti-static device, fire resistance, body cavity pressure relief

Part numbers

Show all part numbers (12)

L1 704, L1 705, L1 707, L1 708, L3 704, L3 705, L3 707, L3 708, L6 704, L6 705, L6 707, L6 708

Request a price and lead time

Forged floating ball valves, NPS 3/8 to 8, ASME Class 150 to 2500. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Can a floating ball valve be fitted on large diameters?

No. The range stops at NPS 8, and trunnion ball valves are used for large diameters and high pressure.

Does the valve shut off flow in both directions?

Yes, the floating ball design shuts off flow in both directions.

Can an actuator be fitted?

Yes. The ISO 5211 mounting flange is forged together with the body, and the valve can be operated by handle, gearbox or actuator.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides